User manual GORENJE K7703W

[. . . ] Electronic timer GB If button 3 is kept pressed, the left side of the display changes minutes, up to the value of 99 50 (meaning 99 minutes and 50 seconds). If the button is not released, the display digits will change to read 1 40, which means that the reading format was changed to 1 hour and 40 minutes. In short: when setting the period, shorter than 1h 40 min. the left side of the display indicates minutes and the right one seconds. [. . . ] The last selected level is stored as default. Volume level may be reset anytime. Using the sensor probe in combination with timer functions (recommended for experienced users) The sensor probe may be used also in combination with the preset cooking period, preset end of cooking time, or with the automatic operation, already described in preceding paragraphs. However, the user should respect the following tips: • With the preset period of operation, the oven will be switched off upon the expiry of the preset time, although the actual temperature of meat might yet not have reached the preset one. Therefore the preset period of operation should be set somewhat longer than the time necessary to reach the desired temperature. • Likewise, this applies also to the function of preset end of roasting and for the automatic operation. Such combinations are advisable when the user has acquired certain experience regarding the Deleting all timer adjustments All the time settings except the alarm timer may be deleted at any time by pressing simultaneously buttons 2 and 3. Preset programs are automatically cancelled and the clock returns to the conventional (manual) mode. Using the clock in combination with oven To use the clock in combination with oven, the first step is to switch the oven on and set the desired baking mode and the temperature. Only after that you may proceed setting the clock functions. After the completion of baking switch the oven off. Electronic timer Wait for 7 seconds for the display to stop flashing and starts indicating the correct current time of day. Setting the period of operation 1 current time / conventional (manual) operation button 2 minus (-) and plus (+) button Turn button 2 in the direction "+" or "-" and release it to lock back in the neutral position. The display indicates 0 00 and the symbol S1 is on, if it has not been switched on earlier. Turn button 2 once again in the direction "+" and keep it in that position. The display indicates 0 10, and the symbol S2 appears, indicating the period of operation of the oven. By keeping button 2 in this position select the desired period of operation in steps of 10 seconds. The left side of the display changes in 10 second intervals until it reaches the value 99 50 (indicating 99 minutes and 50 seconds). Maximum possible period to be set is 10 hours. If button 2 is not released, the display digits will change to read 1 40, which means that the reading format was changed to 1 hour and 40 minutes. In short: when setting the period, shorter than 1h 40 min the left side of the display indicates minutes and the right one seconds. Likewise, if the selected period is longer, the left side displays hours and the right one minutes. Once the desired period of operation is selected, the time countdown starts after the 7 second lapse. In case the selected period is shorter or equal to 99 minutes and 50 seconds, the countdown intervals will be of 1 second, and if the selected period exceeds 99 minutes and 50 seconds the time will be counted down in 1 minute steps. In case the period needs to be reset to zero during the countdown, keep the button 2 turned towards the position "-" for as long as the display reaches 0 00 and the symbols S1 and S2 are turned off. By turning button 2 again towards the position "-" and releasing it, the clock is reset to the conventional (manual) operation mode. Setting the current time After connecting the appliance to the mains the display indicates flashing 0 00. [. . . ] Preset programs are automatically cancelled and the clock returns to the conventional (manual) mode. Recommended inner temperatures of meat core Roast pork: 85°C Roast beef: 80°C Roast veal: 75°C Roast tenderloin: 40-55°C Using the clock in combination with oven To use the clock in combination with oven, the first step is to switch the oven on and set the desired baking mode and the temperature. Only after that you may proceed setting the clock functions. After the completion of baking switch the oven off. Procedure • Connect the probe and stick it inside the roast. Left side of the display indicates the actual temperature and the right 16 Instructions for Use Electronic timer The electronic timer is used to program the oven operation time from 00 to 24 hours. Use of timer • Current time of day • Preset stop of oven operation • Alarm timer. • After connecting the appliance to the mains, or in case of power failure, the display intermitently flashes 0 00 and AUTO. [. . . ]