User manual GOVIDEO D2730 Product Manual

[. . . ] 1 Unpack Your Networked DVD Player · · · · · · · · · D2730 networked DVD player (1) Remote control (1) AAA alkaline batteries (2) Audio/video cable (1) Network card (PCMCIA to 10/100 Mbps wire Ethernet adapter) (1) CD with GoVideo D5 Media Server and on-screen skin management software (1) User's guide (1) Quick reference guide (1) Warranty registration card (1) Insert Remote Control Batteries 1 Remove battery cover on back of remote control. 2 Insert two 1. 5V AAA batteries, paying attention to the correct polarities (+/-). 3 Replace cover. D2730 Networked DVD Player In case warranty service is required, please take a moment to attach your receipt to this manual and write down your Serial Number, located on the back panel of the DVD player: __________________________________. © 2003. Streaming media platform technology protected ©1999 2002 2003 by Digital 5, Inc. [. . . ] · The Change Language window opens. 3 Select the desired language from the drop-down list and click OK. · The change in language will not take effect until you close and relaunch the software. System Tab 30 Chapter 4 :: Basic Disc Playback DVD Operations Basic Setup Getting Started Playing a DVD, CD, or VCD Before you begin: · Turn on the DVD player using the front panel POWER button. If the unit is in Standby mode, press STANDBY/ON on the remote control to power on the unit. The blue LED will light behind the front panel arrow keys. · Turn on your TV, and set it to the audio/video input connected to the DVD player. · Turn on your audio system (if using an external amplifier/audio system), and set it to the input connected to the DVD player. 1 Press OPEN/CLOSE on the remote control or front panel to open the disc drawer. 2 Place the disc in the drawer with the label side facing up and playback side facing down. If the disc has two sides, place the disc with the desired playback side facing down. 3 Press OPEN/CLOSE again to close the disc drawer. 4 Press PLAY on the remote control or front panel. · Many discs will load and begin playing automatically when the disc drawer closes. · If the DVD has a disc menu, or more than one title, the disc menu may appear; see Disc Menu Navigation on page page 32. · Adjust the playback volume by pressing the VOL Y/B keys on the remote control. · Do not push the disc tray when closing it. Always press OPEN/CLOSE to close the disc tray. · If the disc is scratched, dirty, or not encoded for Region 1, you will receive an error message and the disc will not play. · Always press STOP to stop playback of a disc before powering off the player. 31 Help Advanced Settings DVD Operations Network Operations Disc Menu Navigation DVD disc menus allow you to select chapters for playback, change the disc's default playback settings (such as Audio format and Subtitle language), and access any special features on the disc. Use the following keys to navigate DVD disc menus. MENU Press to display the disc menu for the currently loaded disc. Press to move the cursor left, right, up, and down in the disc menu. ENTER Press to make selections and confirm settings in the disc menu. 0-9 Press to make direct selections in some disc menus. RETURN Press to display the previous menu or to exit the disc menu. Additional Disc Playback Options D2730 Networked DVD Player · · · · · · · · · Press PAUSE/STEP to freeze playback. [. . . ] Unauthorized substitutions may result in fire, electric shock, or other hazards. 22 Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 23 Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 24 Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Safety/Regulatory Information Caution D2730 Networked DVD Player To prevent fire, shock hazard, or annoying interference, use only the recommended accessories. To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted to prevent blade exposure. To reduce the risk of electric shock, do not remove the unit cover or back. Refer servicing to qualified personnel only. WARNING: TO AVOID HAZARDOUS EXPOSURE TO INVISIBLE LASER RADIATION, DO NOT OPEN OR REMOVE/DEFEAT LASER TRANSPORT PROTECTIVE HOUSING. CLASS 1 LASER PRODUCT This appliance is classified as a CLASS 1 LASER PRODUCT. [. . . ]