User manual GOVIDEO DVR4300 Product Manual

[. . . ] DVR4300 User's Guide Unpack Your DVD+VCR · · · · · · · · DVD+VCR unit Remote control 1. 5V AA batteries (2) Coaxial cable Stereo audio/video cable User's guide Read Me First/Quick Reference Guide Warranty registration card Insert Batteries · · · Remove battery cover. Insert two 1. 5V AA batteries, paying attention to the correct polarities (+/-). Replace cover. Coaxial Cable Audio/Video Cable DVR4300 DVD+VCR Copyright/Trademarks Go-Video is a registered trademark of SONICblue Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corp. [. . . ] · To prevent damage to your speakers, do not select YES unless you have connected a DTS -equipped audio/video receiver to the Digital Audio Output (coaxial) on the DVD+VCR back panel. 29 Basic Operations Help Advanced Features Setup Connections :: Rating Control Setup Set/Change Rating Level 1 2 3 4 Press SETUP/ENTER. Press Y/B and " to select DVD Setup Menu. Press Y/B and " to select Rating Control. If the Enter Password screen appears, then Require Password has already been set to Yes. Press Y/B and " to select and set Require Password as follows: NO Indicates that Rating Control is disabled. YES Indicates that Rating Control is enabled, and a password is required to change Rating Control options. Enter a 4-digit password using the 0-9 keys on the remote control. Be sure to write down your password and store it in a safe place!Press Y/B and " to select Change Rating Level. Press Y/B and " to select the desired Rating Level, and then press SETUP/ ENTER to save and exit. (DVDs that are rated higher than the level you select will not play without entering the password. 5 6 7 Change Password DVR4300 DVD+VCR 1 2 3 4 5 6 7 8 9 Press SETUP/ENTER. Press Y/B and " to select DVD Setup Menu. Press Y/B and " to select Rating Control. Use the 0-9 keys to enter the current password. Press Y/B and " to select Change Password. Use the 0-9 keys to enter the new password. Use the 0-9 keys to re-enter the same password. A menu will appear to indicate whether or not the password has been successfully changed. Press RETURN repeatedly to exit the menu system. 30 Chapter 4 :: Basic Disc Playback Basic Operations Connections Getting Started To Play a DVD, CD or VCD 2 3 4 Basic Operations Help Advanced Features 1 Press EJECT on the remote control or front panel to open the disc drawer. The DVD+VCR will power on automatically when you open the disc drawer. Place the disc in the drawer with the label side facing up. [. . . ] Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, · If the product has been dropped or damaged in any way, and · When the product exhibits a distinct change in performance ­ this indicates a need for service. 53 Help Advanced Features Basic Operations Setup Connections Getting Started 21 Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts spec- ified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 22 Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. [. . . ]