User manual GP BATTERIES V800C

[. . . ] Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). Different contact plates for AA and AAA NiMH batteries are set in the outer and inner part of the charging slots respectively. 2) When inserting AAA batteries into the charging slots, slant the batteries to ensure smooth contact with the plates. Close the door - ensure the door is securely closed, otherwise the charging process will not commence. [. . . ] Charging time may vary based on different battery capacities. Remove batteries from an electrical device if it will not be used for a long time. Do not charge other types of batteries, such as alkaline, carbon zinc, lithium, rechargeable alkaline or any other unspecified batteries, as they may leak or burst, causing personal injury and damage. Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. Unplug the charger from the outlet before attempting to clean. Do not expose the charger to rain, snow or extreme conditions. Button cell can be replaced by opening the battery door anticlockwise at the rear side of the charger with a clip. Button cell can be replaced by opening the battery door anticlockwise at the rear side of the charger with a clip. Button cell can be replaced by opening the battery door anticlockwise at the rear side of the charger with a clip. Corded-type charger with AC100-240V adaptor Charge 1 to 4 AA or AAA NiMH rechargeable batteries Equipped with 4 individual charging channels Termination methods: - Individual minus delta voltage (-dV) - Individual temperature sensor - Individual safety timer Over-temperature protection Primary and damaged batteries detection Easy check LED icons Digital clock Safety guaranteed Read the instruction manual thoroughly before use. Each charging slot can only charge 1 battery (either AA or AAA). 3A adaptor with its corresponding plug to the charger and plug it into the power source (Fig. Insert AA or AAA NiMH batteries into the charging slots according to the polarity indications (+/-). Different contact plates for AA and AAA NiMH batteries are set in the outer and inner part of the charging slots respectively. 2) When inserting AAA batteries into the charging slots, slant the batteries to ensure smooth contact with the plates. Close the door - ensure the door is securely closed, otherwise the charging process will not commence. If alkaline, carbon zinc, lithium, rechargeable alkaline or damaged batteries are mistakenly inserted into the charging slots, the corresponding Battery Icon and the Warning Icon will blink fastly and the charger will stop charging. Make use of the Battery Location Dot to identify the charging slots represented by the battery icons on the main screen, which are correlated with the icons on the silkscreen on the battery compartment. [. . . ] Remove batteries from an electrical device if it will not be used for a long time. Do not charge other types of batteries, such as alkaline, carbon zinc, lithium, rechargeable alkaline or any other unspecified batteries, as they may leak or burst, causing personal injury and damage. Never use an extension cord or any attachment not recommended by GP, as this may lead to a risk of fire, electric shock or personal injury. Unplug the charger from the outlet before attempting to clean. [. . . ]