User manual GRACO BEACON TOWER INSTRUCTIONS PARTS

[. . . ] Instructions-Parts Beacon Tower Not for use in explosive atmospheres. 313542C ENG Diagnostic indicator for use with ProMix® 2KS Proportioner. For professional use only. Important Safety Instructions Read all warnings and instructions in your ProMix 2KS installation, operation, and repair manuals. 122193 Beacon Tower For ProMix 2KS automatic systems. [. . . ] Feed the wires through the hole and secure the beacon (1) with jam nuts (N) on the inside and outside of the box. Connect yellow and gray wires from beacon to the power terminal. Connect orange, brown, and red wires to header pins 6, 7, and 8. Install the din rail (7) with two screws (8). Install the header (5) on the din rail and connect the cable (4) to J5 on the EasyKey display board. Connect yellow and gray wires from beacon to the power terminal. 2. Gray (Common) OUTPUT DC INPUT AC DC OK 4. To enable the optional audible alarm, connect sky blue wire to pin 6 on header. When enabled, it will sound for all system alarms. When beacon wiring is completed, insulate the end of each unused lead wire with insulation tape. + - N (-) NC NC L (+) Yellow (+24V) TI14041a FIG. 2: Power Terminal Connections 2 313542C Parts Parts 122193 Beacon Tower, includes item 1 only 15W034 Beacon Tower Kit, includes items 1-8 Ref Description 1 2 3 4 5 6 7 8 LIGHT TOWER, Part No. 122193 CONNECTOR, terminal, female CONNECTOR, 10 position WIRE HARNESS, 3 conductor with shield; 24 in. (0. 6 m) HEADER, 5 position, din rail mount CONNECTOR, 5 position DIN RAIL SCREW, machine; 6-32 x 1/4 in. (6 mm) Qty 1 3 1 1 1 1 1 2 OUTPUT DC 1 Mount din rail (7) in these holes, using two screws (8). 2, 3 Last Pin TI14039a 6 5 Pin 1 Pin 2 4 TI14038a FIG. [. . . ] MM 313542 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. BOX 1441 MINNEAPOLIS, MN 55440-1441 Copyright 2009, Graco Inc. is registered to ISO 9001 www. graco. com Revised 01/2010 [. . . ]