User manual GRACO ELECTRIC MOTOR KIT

[. . . ] 1 111195 SCREW, cap, flange-head; 1/2-13 x 4 1. 25 in. (31 mm) System pressure can cause the pump to cycle unexpectedly, which could result in serious injury from splashing or moving parts. Open the back pressure regulator and all fluid drain valves in the system, having a waste container ready to catch drainage. [. . . ] Align the key (36) on the motor shaft with the mating slot of the motor coupler, and the four mounting holes with the holes in the gear reducer (1). 36 19a, 19b, 19c, 19d 5 5 Torque to 75-80 ft-lb (102-108 N·m). ti9913a FIG. Kit Installation (All Kits) Table 1: Electric Motor Specifications Motor Kit Part No. 255226 255225 289552 289551 Voltage 230/400V 230/460V 230/400V 230/460V Phase 3 3 3 3 Supply Frequency 50 Hz 60 Hz 50 Hz 60 Hz Horsepower 5 5 3 3 rpm 1500 (4 pole) 1800 (4 pole) 1500 (4 pole) 1800 (4 pole) Full Load Torque 15 ft-lb (20. 3 N·m) 15 ft-lb (20. 3 N·m) 9. 1 ft-lb (12. 3 N·m) 9. 1 ft-lb (12. 3 N·m) 311613D 3 Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco's written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco's sole obligation and buyer's sole remedy for any breach of warranty shall be as set forth above. [. . . ] Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505 All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. MM 311613 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. [. . . ]