User manual GRASS VALLEY 8947RDA-FR DATASHEET

[. . . ] 38 8947RDA-FR Fiber-Ready SD/HD Reclocking DA Key Features · Eight-output SD-SDI or HD-SDI reclocking distribution amplifier · Fiber-ready architecture supports up to two optional connections -- 100% DVB ASI compliant -- High connectivity density: eight coaxial outputs and fiber option · Remote control and monitoring via Ethernet frame interface The 8947RDA-FR is a dual SD/HD reclocking distribution amplifier, with automatic format detection. [. . . ] Supporting up to two fiber connections, this module is ready for either fiber-in or fiber-out applications. It can also distribute eight noninverted DVB ASI outputs, making it ideal for receiving signals from distant downlinks or transmitting to remote uplinks. 8900WFR-R SD/HD SDI Out SD/HD SDI Out SD/HD SDI Out SD/HD SDI Out SD/HD SDI In J1 J2 SD/HD SDI Out SD/HD SDI Out SD/HD SDI Out SD/HD SDI Out Fiber I/O Connector J3 J4 J5 J6 Applications · Distributing HD signals or SD/HD in rate-agile installations · Installations that will upgrade to HD · Combining SD, HD, or ASI distribution with long-distance, isolating fiber connection · As a fiber receiver or transmitter in singlechannel-per-module applications J7 J8 J9 FIBER Equalizer bypass SD/HD SDI In Equalizer Reclock bypass Reclocker 8X SD/HD SDI Out Up to one fiber option may be selected Fiber RX Option Fiber RX SD/HD Optical In Fiber RX Option Format Detector Fiber TX Option Fiber TX SD/HD Optical Out Fiber TX Specifications Supported Frame Types GeckoFlex frame Ordering Information Performance Electrical length: <10 ns (reclocking enabled) <5 ns (reclocking bypassed) This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames. Power Rating 4. 1 Watts ­ single slot Distribution Equalizing: Active/bypass Reclocking: Active/bypass Manual input selection: Coax In, fiber 1, fiber 2 (with optional fiber input option) Input format selection: Automatic/manual 8947RDA-FR SD/HD re-clocking distribution amplifier ­ fiber ready (front and rear module set) Inputs SD/HD-SDI: ·Inputequalization:upto125mHD-SDI, up to 330m SD-SDI (Belden1694A) ·Returnloss:>15dB0. 004to1. 5GHz Optical: Single-mode (optional) Formats supported: 1080i @ 59. 94, 50, 720p @ 59. 94, 50, 480i @ 59. 94 (NTSC) 576i @ 50 (PAL-B) DVB ASI: Yes SFP-13103G-M1DRX Dual input fiber receiver. Suits one-signal-per-fiber and CWDM fiber systems Control and Monitoring SNMP: Yes Web page configuration: Yes Local configuration: Yes Newton support: Yes NetConfig support: Yes NetCentral support: Yes SFP-13103G-M1DTX Dual output fiber transmitter. For one-signal-per-fiber systems SFP-13103G-M1TRX Fiber transceiver. [. . . ] For one-signal-per-fiber systems Outputs SD/HD-SDI: Eight outputs ·Returnloss:>15dB, 5to270MHz; >10 dB to 1. 5 GHz ·Signallevel:SDI800mVp-p±10% ·Outputjitter:forinputwith<0. 1UIjitter, theoutput jitter complies with the SMPTE 259M & 292M standards Optical: Single-mode (optional) DVB ASI: Eight non-inverted outputs For detailed specifications, installation, and setup instructions see: www. grassvalley. com/docs/modular [. . . ]