User manual GRASS VALLEY KAYENNE XL PACKAGE 7.0.3 INSTALLATION AND SERVICE MANUAL REV 8-2010

[. . . ] Kayenne XL Package KAYAK HD DIGITAL PRODUCTION SWITCHER Installation and Service Manual Software Version 7. 0. 3 071870003 AUGUST 2010 Affiliate with the N. V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040. 001 The Quality System of: Thomson Inc, and it's wordwide Grass Valley division affiliates DBA GRASS VALLEY Headquarters 400 Providence Mine Rd Nevada City, CA 95959 United States Kapittelweg 10 4827 HG Breda The Nederlands Rue du Clos Courtel CS 31719 35517 Cesson-Sevigné Cedex France 40 Rue de Bray 2 Rue des Landelles 35510 Cesson Sevigné France Carl-Benz-Strasse 6-8 67105 Schifferstadt Germany 15655 SW Greystone Ct. Beaverton, OR 97006 United States 7140 Baymeadows Way Ste 101 Jacksonville, FL 32256 United States 1 rue de l'Hautil Z. I. des Boutries BP 150 78702 Conflans-Sainte Honorine Cedex France Spinnereistrasse 5 CH-5300 Turgi Switzerland 10 Presidential Way Suite 300 Woburn, MA 01801 United States 2300 So. [. . . ] A single power supply is adequate for the PCU frame. One additional power supply provides redundancy. 76 Kayenne XL Package -- Installation and Service Manual Section 4 System Cabling Overview The Kayenne XL system uses Ethernet, serial, and USB connections. Custom multi-pin cabling is also used to connect the Kayenne XL Panel Control Unit (PCU) to Kayenne XL control surface and Menu Panel components. The Kayak HD Video Processor Frame and PCU each have built-in Ethernet switches. Tally outputs and GPI I/O (General Purpose Interface Input/Output) control is also available (Figure 54). Figure 54. Kayenne XL System Communications Overview Menu Panel USB (4) Kayenne XL PCU 7 Hard Disk 8 Hard Disk Ehternet Switch Kayenne XL ContrPanel Local Aux Stripe ME Stripe ME Stripe ME Stripe (Up to 8 Stripe Connections) 4 5 6 1 2 3 4 Ehternet Switch Keyboard, VGA* RS-232* USB (2)* Menu CPU 1 2 3 Kayak HD Video Processor Frame Video Processor CPU Compact Flash Internal Control 5 6 7 8 Menu CPU (option) RS-422/485 (8) GPI In/Out Tally USB (2)* Keyboard, VGA* RS-232* Panel CPU Compact Flash Panel Main LAN Panel Aux LAN (not used) Image Store CPU RAM Only USB RS-422/485 Ethernet Serial Control Custom Multi-Pin (Menu, 15m / 50ft max length) Custom Multi-Pin (Panel, 15m / 50ft max length) * Maintenance Only (board front edge) Drive Disable Internet or Wireless Connections Remote Aux Panel Facility LAN Switch Remote Aux Panel CAUTION The facility network used for your Kayenne XL/Kayak HD system (and other video production equipment) should be kept separate from any external network, to prevent network traffic from adversely affecting Kayenne XL system operation. Kayenne XL Package -- Installation and Service Manual 8623266_39_r1_ws RS-232* USB (2)* Keyboard, VGA* Technical Director's Laptop CD-ROM Ethernet Router Isolate Kayenne System from External Network 77 Section 4 -- System Cabling Kayenne XL system power is provided by power supplies built into the Kayak HD Video Processor Frame and Kayenne XL PCU. Power is routed to control surface components and Menu Panels from the PCU through the custom multi-pin cabling. Additional Frame and PCU power supplies are available for redundancy. Serial digital video and key input and output signals are connected to the Kayak HD Video Processor Frame. Specified MatchDef Input pair and SetDef Output pair connectors on the Frame can be used for internal format conversion (an optional feature). Separate Video Reference inputs are available for HD and SD formats. Network Cabling Network connections are required between the Kayak HD Video Processor Frame and the PCU. The PCU routes network communications to and from the Control Panel Stripes and Menu Panels, using custom multi-pin cables. The Ethernet switches built into the Kayak HD Frame and PCU auto-detect speed and polarity, and are 10/100/1000 Mbps capable. Either straightthrough or crossover Ethernet cabling can be used. Available Ethernet connectors may be connected to the Facility LAN or other devices, as needed. However, should the Kayak HD Frame or PCU power down, the internal Ethernet switches will also power down, interrupting communication to devices connected to that Frame's or PCU's internal Ethernet switches. Only connect devices that are Kayenne XL/ Kayak HD system related. The use of two Ethernet cables to connect the PCU to the Frame is recommended (Figure 55). Figure 55. PCU to Frame Network Connection Methods Two Cable PCU Frame Connection Kayenne XL PCU 7 Ehternet Switch Menu CPU 1 2 3 4 5 6 Kayak HD Video Processor Frame Video Processor CPU 1 2 3 4 Ehternet Switch 5 6 7 8 Internal Control 8623266_40_r1_ws Menu CPU (option) 8 Panel CPU Panel Main LAN Panel Aux LAN (reserved) Image Store CPU 78 Kayenne XL Package -- Installation and Service Manual Network Cabling The PCU Ethernet switch to Frame Ethernet switch cable connection is used for Menu Panel communications. The second cable connects the Panel PCU directly to the Frame's Ethernet switch. Using two cables provides additional Ethernet communications throughput (to support Image Store file operations) and also offers redundancy. Because the Menu Panel and the Control Panel have independent cable connections, failure of one of these cables will not completely disable the Kayenne system. [. . . ] Digit 2 shows the middle number of the FGPA firmware version (DS1281. 037). Digit 3 shows the upper number of the FPGA firmware version (DS1281. 037) (X1 always shows "!" to see the difference to the released versions). Example codes are shows in Table 21 Table 21. Control Panel Module Boot Display Codes Examples Digit 0 3 7 * 1. Module interface link is working (normal/default). [. . . ]