User manual GRASS VALLEY PRELUDE V3.2.1

[. . . ] Prelude COMPACT ROUTER CONTROL SYSTEM Instruction Manual Software Version 3. 2. 1 071838204 JULY 2009 Affiliate with the N. V. KEMA in The Netherlands CERTIFICATE Certificate Number: 510040. 001 The Quality System of: Thomson Inc, and it's wordwide Grass Valley division affiliates DBA GRASS VALLEY Headquarters 400 Providence Mine Rd Nevada City, CA 95959 United States Kapittelweg 10 4827 HG Breda The Nederlands Rue du Clos Courtel CS 31719 35517 Cesson-Sevigné Cedex France 40 Rue de Bray 2 Rue des Landelles 35510 Cesson Sevigné France Carl-Benz-Strasse 6-8 67105 Schifferstadt Germany 15655 SW Greystone Ct. Beaverton, OR 97006 United States 7140 Baymeadows Way Ste 101 Jacksonville, FL 32256 United States 1 rue de l'Hautil Z. I. des Boutries BP 150 78702 Conflans-Sainte Honorine Cedex France Spinnereistrasse 5 CH-5300 Turgi Switzerland 10 Presidential Way Suite 300 Woburn, MA 01801 United States 2300 So. [. . . ] button, select the router configuration you saved earlier and click Load. This brings up a blank panel configuration screen(Figure 26). Default values will be assigned to the flags and attributes. Figure 26. Blank Panel Configuration Screen Prelude -- Instruction Manual 45 Section 2 -- Installation and Initial Setup 3. To configure the panel buttons, you assign a function and, if appropriate, a selection to each button, using similar techniques used earlier to configure the router Sources and Destinations. Select a range of Function fields and right click (Figure 27). Figure 27. A pane will appear listing the available functions. Choose Src Select (Figure 28). Figure 28. Button Function Selection Pane 46 Prelude -- Instruction Manual Create Panel Configurations 5. Now highlight the Selection column for those buttons, right click, and choose Set Selection (Figure 29). Figure 29. A pane appears listing the Sources available in the currently loaded router configuration file. Choose a range of Sources for the highlighted buttons (Figure 30). Figure 30. Button Source Selection Pane Prelude -- Instruction Manual 47 Section 2 -- Installation and Initial Setup 7. The Sources will be assigned to those buttons. Continue this process until all the buttons for the panel have been configured (Figure 31). Additional control panel attributes and flags are available at the bottom of this screen. These features are described in Section 3-Configuration Reference. Figure 31. Completed Control Panel Configuration 48 Prelude -- Instruction Manual Create Panel Configurations 8. With the control panel configuration completed you should now save the configuration file to the PC. A file name prompt will appear (Figure 24). Figure 32. Router Configuration File Name Prompt 9. Enter a descriptive name (8 characters maximum) for this particular control panel configuration file and click Save. [. . . ] ENC-UCP Panel Button Attributes and Flags Prelude -- Instruction Manual 89 Section 3 -- Configuration Reference ENC-UPC Attributes and Flags The lower portion of the Control Panel configuration page contains several Control Panel parameters, which are based on Encore functionality. Grayed out attributes and flags are not available for use with this panel type. The parameters available are identical to those for the XY panel, described starting on page 87, except the buttons are relocated into the half/rack form factor and the NP Server feature supports serial communications. NP Server Configuration Opens a window allowing configuration of Native Protocol servers for the control panel. The UCP panel supports one serial server, in addition to four Ethernet servers (Figure 65). [. . . ]