User manual GRISOFT AVG RESCUE CD FOR WINDOWS REV 85.2

[. . . ] AVG Rescue CD for Windows User Manual Document revision 85. 2 (7. 4. 2009) Copyright AVG Technologies CZ, s. r. o. All other trademarks are the property of their respective owners. This product contains Windows software licensed from Microsoft Corporation and/or MS Affiliate(s). The Microsoft Windows Preinstallation Environment software included with this software may be used for boot, diagnostic, setup, restoration, installation, configuration, test or disaster recovery purposes only. [. . . ] Here you will find a list of available network adapters. If there are multiple items listed, look for the adapter you use for Internet connection (if you are connecting via LAN/WAN network, look for names like Ethernet NIC, LAN CARD, LAN Adapter, Ethernet Controller etc. ). If you cannot recognize your network adapter from multiple choices, repeat the steps c) to d) for all the available network cards. AVG Rescue CD © 2009 Copyright AVG Technologies CZ, s. r. o. All rights reserved. 38 c) Right-click the chosen network adapter and select Properties. A new dialog, similar to the sample one, will appear: AVG Rescue CD © 2009 Copyright AVG Technologies CZ, s. r. o. All rights reserved. 39 Select the Driver tab and click the Driver Details button. In the Driver files section you will see a list of files and their locations. Navigate to the mentioned locations and copy all files to a separate folder or just note down the file name and location. You can find it in the c:\Windows\Inf location, AVG Rescue CD © 2009 Copyright AVG Technologies CZ, s. r. o. All rights reserved. 40 where c:\ is your system drive, and \Windows is your Windows installation directory. There are several . inf files in this directory, so you need to find the one, that contains the driver file name that you found in the previous step (in our case Rtnicxp. sys). The easiest way to search for the . inf file is to press the Windows Start button, select Run and type in: c:\windows\inf Assuming that this is your windows location and system drive. A new dialog will appear, press F3 to open the search panel and if asked, select All files and folder. There should be two fields All or part of the file name and A word or phrase in the file. To the first one type in *. inf and to the second one type in the file name of your driver. You should experience some results: AVG Rescue CD © 2009 Copyright AVG Technologies CZ, s. r. o. All rights reserved. 41 From the result dialog box select all files found and copy them to a separate directory (different from the one you placed the previous driver file into), or just note down the name of the file. Note: If there are no results listed, make sure you typed in the name of the driver file correctly, or try to use only part of the driver name. e) You can repeat the process for all other files that you found via the Driver file details dialog, if necessary, but usually one driver uses only one . inf file. Once you have finished searching for the appropriate files, go back to the AVG Rescue CD creator application and continue with the ISO file compilation. More can be found in the chapter 2. 3. f) AVG Rescue CD © 2009 Copyright AVG Technologies CZ, s. r. o. All rights reserved. 42 3. After Startup After successful startup of the AVG Rescue CD, AVG should be automatically started. As AVG Rescue CD is built on a specific Windows platform, a low screen resolution is used by default to avoid graphics adapters compatibility issues. [. . . ] Using different kinds of coding might be useful when saving documents in special character sets. 6. 8. AVG IP Config AVG IP Config is a utility for managing your network settings. It displays all current TCP/IP network configuration values and allows you to change them if needed. · IP Config tab AVG Rescue CD © 2009 Copyright AVG Technologies CZ, s. r. o. [. . . ]