Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GRUNDIG APOLLO 2000. We hope that this GRUNDIG APOLLO 2000 user guide will be useful to you.
Lastmanuals help download the user guide GRUNDIG APOLLO 2000.
Detailed instructions for use are in the User's Guide.
[. . . ] If the loudspeakers are subjected to sudden changes in temperature, for example if they are brought in from the cold to a warm room, connect them to the mains supply and let them stand for at least two hours. The loudspeakers are designed for use in dry rooms. If you do use them in the open, please ensure that they are protected from moisture, such as rain or lawn sprinklers. [. . . ] In some circumstances, people, walls and other surfaces can reflect radio signals. Reflected signals can mix with direct (non-reflected) signals thus causing a type of interference known as multi-path reception. This can lead to noise or a temporary loss of sound. If such interference does occur, simply position the loudspeakers differently. The loudspeaker is completely disconnected from the mains. in the mains button: Red: the loudspeaker is in Stand-by mode; Green: the loudspeaker is in operation; Orange: the loudspeaker is in Installation mode; Flashing green and orange: Reset mode; Flashing red: the protective circuit has been actuated. Button located on the bottom of the casing to reset the loudspeaker to its original state. For special applications or if you want to connect your RCD 2000 HiFi system to the loudspeakers using a cable (Room 1 only). Note: If the protection circuit is actuated, switch off the loudspeaker using the »POWER« button and let it cool down for at least 15 minutes. This manual also describes how to assign pairs of loudspeakers to different rooms, if you are using more than one pair. 1 Switch on both loudspeakers using the »POWER« button. Note: The loudspeakers switch themselves on or off automatically when you switch the HiFi on or off. The green indicators in the loudspeakers light up. These loudspeakers are noise-suppressed according to the applicable EC directives. this product fulfils the European directives 89/336/EEC , 73/23/EEC and 93/68/EEC. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety regulation IEC 60065. [. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GRUNDIG APOLLO 2000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GRUNDIG APOLLO 2000 will begin.
