User manual GRUNDIG BEEZZ RRCD 4101

[. . . ] There must be a free space of at least 10 cm behind the device. Do not place objects on the ventilation slots. Do not place any objects containing liquids (for example, vases) on the device. Do not insert any foreign bodies in the CD compartment of the device. [. . . ] If this is not the case, contact your specialist dealer. 1 2 Plug the mains cable supplied into the »AC Plug the power cord into the wall socket. Caution: The only way to disconnect the device from the mains supply is to pull out the plug. ~ « socket on the back of the device. Battery operation 1 2 Open the battery compartment on the bottom of the device by pressing the catch and removing the lid. Insert six batteries (6 x 1. 5 V, type IEC LR14/AM2/C size), observing the polarity marked in the battery compartment. Note: to reduce battery consumption, during battery operation it is not possible to switch the device on with »ON/OFF« on the remote control. Notes: Remove the batteries when they are flat or when you know that the device will not be used for a long period of time. The manufacturer accepts no liability for damage resulting from leaking batteries. The batteries are switched off during mains operation. Environmental note: Batteries, including those which contain no heavy metal, should not be disposed of with household waste. Please dispose of used batteries in an environmentally responsible manner. Find out about the legal regulations which apply in your area. 31 ENGLISH CONNECTION AND PREPARATION ___________ Inserting the battery in the remote control 1 2 3 4 Pull off the film from the battery. In no circumstance must any of the wires be connected to the terminal marked with the letter "E", earth symbol "z", coloured green, or green & yellow. Replacement mains lead sets can be obtained from your local dealer, or by contacting Grundig Consumer Relations (01788 570088) Moulded 3-pin lead set, suitable for UK use: Ref: Leadset UK 8290-991-224 Moulded 2-pin Euro lead set, not suitable for UK use: Ref: Leadset Euro 8290-991-316 33 DEUTSCH GENERAL FUNCTIONS __________________________________ Switching on and off 1 2 Press »ON/OFF« to switch on the device. Press »ON/OFF« to switch off the device. Selecting the input source 1 Press »SOURCE« to select the input source (Tuner or CD). Adjusting the volume 1 Adjust the volume with »­ z +«. Switching the Ultra Bass System on and off This function boosts the bass frequencies. 1 Switch the Ultra Bass System on and off with »UBS«. Selecting sound effects 1 Select the desired sound setting (Flat, Classic, Rock, Pop or Flat again) with »EQ«. Listening with headphones 1 Connect the headphones to the »0« headphone jack (ø 3. 5 mm) (rear of the device). ­ This automatically switches off the loudspeakers. 34 RADIO MODE _________________________________________________ Antennas 1 For FM stations (VHF) extend the telescopic antenna »Antenne«. Note: If the FM signal is too strong, it is advisable to push in the telescopic antenna. This can be caused by faulty software or hardware settings or by the CD being used. Should such problems arise, contact the customer services of your CD burner or software manufacturer or look for relevant information, for example on the Internet. When you are making audio CDs, observe all legal guidelines and ensure that the copyright of third parties is not infringed. Always keep the CD compartment closed to prevent dust from collecting on the laser optics. You can play standard 12 cm CDs as well as 8 cm CDs on your device. [. . . ] ­ Display: »PO1« for the first preset position and »MEMORY«, »000« for the first file to be saved flashes. Select the file you want by pressing »8« or »9«. Note: To start a forward or reverse file search, press and hold down »8« or »9«. 4 Press »PROG. « to save the file. [. . . ]