User manual GRUNDIG CDP 5400 SPCD

[. . . ] Always keep the disc compartment closed to prevent dust from collecting on the lens. No warranty claims are accepted for damage resulting from improper handling. If the device is unable to scan CDs perfectly, use a standard, commercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics. [. . . ] 2 To quit the function, press »MODE« until the repeat indicator goes out. Notes: Completely charge up the batteries before you first use them or if you have not used them for a long time. The charging time is approximately 12-14 hours for empty batteries when the device is stopped. The ambient temperature should be between 5 °C and 40 °C. If you have disconnected the mains adapter from the mains, playback using the rechargeable batteries is only possible if you pull the adapter cable out of the »DC IN 4, 5 V Ó« socket of the device. Take out the batteries when you know that the device will not be used for a long period of time. 2 To quit the function, press »MODE« until the repeat indicator goes out. ­ All the files on the CD are played back repeatedly. 2 To quit the function, press »MODE« until the repeat indicator goes out. When buying rechargeable batteries, always make sure that approximately 3 mm of the metal end at the negative pole is visible. Shows the total number of tracks, albums or files, and shows the current track or file number. Shows the total playing time and the elapsed playing time of the track or file. Notes: Excessive volume can be hazardous to yourself and other road users. Listen at a volume which still allows you to hear outside noises clearly, for instance horns, emergency vehicles and police cars. the output of the device guarantees the best possible sound at medium volume. Prolonged listening at loud volumes can damage your hearing. 1 During playback, keep pressing »MODE« until »INTRO« flashes in the display. ­ The first ten seconds of the following track or file are played. 2 To quit the function, keep pressing »MODE« until the mode displays go out. Playing back tracks or files in random order (Random) 1 During playback, keep pressing »MODE« until »RAND« flashes in the display. ­ All of the tracks or files on the CD are played back in random order. 2 To quit the function, keep pressing »MODE« until the mode displays go out. [. . . ] 1 Push the sliding switch »OPEN « to the right and open the CD lid. 2 Insert the CD with the label facing upwards and gently push the centre of the CD to latch it into place. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety regulation IEC 60065. the type plate is on the bottom of the device. [. . . ]