User manual GRUNDIG DSR 1750 MICRO

[. . . ] DIGITAL SATELLITE RECEIVER DSR 1750 MICRO CONTENTS ____________________________________________ 4-5 4 4 5 General information Packing contents Receiving digital satellite channels Special features of your Digital Satellite Receiver 6 7-8 7 7 8 Set-up and safety Overview The Digital Satellite Receiver The infrared receiver The remote control 9-10 9 9 10 10 10 Connection/preparation Connecting the antenna Connecting the television Connecting the infrared receiver Connecting the power supply unit Inserting batteries into the remote control 11-17 11 12 13 14-15 16-17 Basic settings The menu Initial setup Setting stations, Option 1 Setting stations, Option 2 Editing channel lists 18-20 18 18 18 18 19 19 19 19 19 19 20 Basic functions Switching on and off Mode selection Selecting presets directly Selecting stations from lists Adjusting the volume Muting the sound Displaying time Switching from the current station to the previous one Displaying time Using options Electronic TV guide 21 21 21 Teletext mode Teletext Additional functions 22-26 22-23 23-24 25 26 Settings Video settings Language settings Menu settings Miscellaneous settings 27 Timer functions 2 CONTENTS ____________________________________________ 28 28 Additional functions Security functions 29-33 29-31 31 32 32 33 Special settings Searching for new stations Specifying the order of stations in the channel list Resetting the digital receiver to its original state Updating the digital receiver software Changing remote control levels 34-37 34 35 36-37 Upgrading the television Connecting a GRUNDIG television with the Digi 200 G2 chassis Installing on the GRUNDIG television set Operating the GRUNDIG television remote control 38-40 38 38 39 39 40 Information Displaying station reception properties Displaying device information Technical data Environmental note Troubleshooting ENGLISH 3 GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 7 Digital Satellite Receiver DSR 1750 MICRO Tele Pilot 766 S remote control 2 batteries for the remote control (2 x 1. 5 V, AA type batteries) SCART extension cable Power supply unit Infrared receiver Operating manual Receiving digital satellite channels In order to use your new DSR 1750 MICRO digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the desired satellites (for example Astra and EutelSat/Hotbird). Unlike broadcasts of analogue satellite channels, not every digital TV or radio station is assigned to one transmission frequency, but several TV and/or radio stations are broadcast by one transponder. To help you with the choice and settings for satellite channels, a selection of TV and radio stations have already been preprogrammed for this device. You can start a channel search to ensure that any new satellite channels are available on your device. [. . . ] If you selected a 16:9 format, you can make the setting: ­ »Automatic« for automatically adjusting by television. ­ »Pillarbox« for 4:3 picture playback with black bars at the left and right of the television screen. The transmitted pictures are enlarged, but are slightly cropped at the top and bottom. 1 2 Select »Picture Scaling« with »P-« or »P+«. Press » « or » « to select the setting. Specifying the video signal at the Euro AV (TV) output You can choose between »Video (FBAS)« (normal picture quality), »RGB« (high picture quality) or »S-VIDEO« (Y/C). The default setting is »RGB«. 1 2 Select »TV Output Formaat« with »P-« or »P+«. Select the video signal with » « or » «. 22 SETTINGS ______________________________________________ Selecting AFD The transmitted screen format can differ from the displayed screen format. AFD recognises and corrects the display when switched on. 1 2 Select »AFD Automatic« by pressing »P-« or »P+«. Press » « or » « to switch AFD on or off. Teletext With this function you can select whether teletext should be displayed on the receiver or the television. 1 2 Select »Teletext« with »P-« or »P+«. Press » « or » « to select the desired setting. Selecting the standard setting You can reset the screen settings back to the default settings (factory settings) with this function. 1 2 Select »Restore Default Settings« with »P-« or »P+« and press »OK« to confirm. Using » «, set the security query to »Yes« and confirm this with »OK«. Ending the settings 1 Press »i« to finish the setting. Language settings 1 2 Press »i« to open the main menu. Select »Box Settings« with »P+« or »P-« and press »OK« to confirm. ­ The »Box Settings« menu appears. Select »Language Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. 3 Setting the menu language 2 Press » « or » « to select the desired language. 23 ENGLISH 1 Select »Menu Language« with »P-« or »P+«. SETTINGS ______________________________________________ Selecting the preferred audio language You can set a preferred language for all programmes. 1 2 Select »Audio Language« with »P-« or »P+«. Press » « or » « to select the desired language. Selecting a second audio language If the programme is not broadcast in the language selected in »Audio language«, the »Second audio language« is used. 1 2 Select »Audio Language #2« with »P-« or »P+«. [. . . ] Press »i« to open the main menu. Select »Technical Information« with »P-« or »P+« and press »OK« to confirm. Select »Channel Information« with »P-« or »P+« and press »OK« to confirm. ­ The »Channel Information« menu appears. [. . . ]