User manual GRUNDIG DSR 1773 CY

[. . . ] DIGITAL SATELLITE RECEIVER DSR 1773 CY CONTENTS 4-5 4 4 5 General information Packing contents Receiving digital stations Special features of your digital receiver 6 7-8 7 7 8 Set-up and safety Overview The digital satellite receiver The infrared receiver The remote control 9-11 9 9 10 10 10 11 11 Connection and preparation Connecting the antenna Connecting the television Connecting the infrared receiver Connecting the power supply unit Inserting batteries in the remote control Inserting a Smart card Connecting the Dolby Surround system 12-19 12 13 14 15-16 17-19 Basic settings The menu Initial setup Settings stations, Option 1 Settings stations, Option 2 Editing favourites lists 20-22 20 20 20 20 21 21 21 21 21 22 Basic functions Switching on and off Mode selection Selecting presets Selecting stations from lists Switching from the current station to the previous one Adjusting the volume Muting the sound Displaying the time Using options Electronic TV Guide 23 23 23 Teletext mode Teletext Additional functions 24-31 24-25 26-27 28-29 30-31 Settings Picture settings Language settings Menu settings Miscellaneous settings 2 CONTENTS ____________________________________________ 32 33-34 33 34 The recording timer Additional functions Security functions Conditional access 35-39 35-36 37 38 38 39 Special settings Searching for new stations LNB settings Resetting the digital receiver to its original state Updating the digital receiver software Changing remote control levels 40-42 40 40 41 41 42 Information Displaying station reception properties Displaying device information Technical data Environmental note Troubleshooting ENGLISH 3 GENERAL INFORMATION __________________ Packing contents Digital Satellite Receiver DSR 1773 CY Tele Pilot 766 S remote control with 2 batteries SCART extension cable Power supply unit Infrared receiver Operating manual Receiving digital satellite channels In order to use your new DSR 1773 CY digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the satellites (for example Astra and EutelSat/Hotbird). Unlike broadcasts of analog satellite channels, not every digital TV or radio station is assigned to one transmission frequency, but several TV and/or radio stations are broadcast by one transponder. To help you with the choice and settings for satellite channels, a selection of TV and radio stations have already been programmed for this device. You can start a channel search to ensure that any new satellite channels are available on your device. [. . . ] To switch off the teletext, press »TXT« again. 5 6 Additional functions Selecting a teletext page directly Most main pages display three digit page numbers that you can select directly. 1 2 Press » « or » « to select the page number. ­ There is a cursor on the first or last page number. Open the teletext page with »OK«. Increasing the character height If you have difficulty reading the text on the screen, you can double the character height. 1 To enlarge the character height of a teletext page, press »A/B«. Opening the station overview 1 Open teletext page 300 with »TV-G«. 23 ENGLISH SETTINGS ______________________________________________ Picture settings 1 2 3 Press »i« to open the main menu. Select »Box Settings« with »P-« or »P+« and press »OK« to confirm. Select »Video Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. Selecting the television picture format If you have a 16:9 format television or flat screen, select the »16:9/Widescreen TV« setting. If you have a 4:3 format television or flat screen, select the »4:3« setting. 1 2 Select »Screen Format« with »P-« or »P+«. Select the screen format you want with » « or » «. Selecting picture adjustment for the television If you selected a 4:3 format, you can make the setting: ­ »Pan & Scan/CCO« for wide-screen playback without black bars on the top and bottom edges of the screen. The picture is cropped on the left and right. ­ »Letterbox 14:9« and »Letterbox 16:9« for widescreen playback, with black bars at the top and bottom of the television screen. If you selected a 16:9 format, you can make the setting: ­ »Automatic« for automatically adjusting by television. ­ »Pillarbox« for 4:3 picture playback with black bars at the left and right of the television screen. The transmitted pictures are enlarged, but are slightly cropped at the top and bottom. 1 2 Select »Picture Scaling« with »P-« or »P+«. Press » « or » « to select the setting. Setting the video signal at the SCART (TV) output You can choose between »Video (FBAS)« (normal picture quality), »RGB« (high picture quality) or »S-Video« (Y/C). The default setting is »RGB«. 1 2 Select »TV Output Format« with »P-« or »P+«. Select the video signal by pressing » « or » «. 24 SETTINGS ______________________________________________ Selecting AFD The transmitted screen format can differ from the displayed screen format. AFD recognises and corrects the display when switched on. [. . . ] 8 W without LNB +5 °C to +40 °C W x H x D: 110 x 70 x 25 mm 120 g Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. Therefore, do not throw the product away with normal household waste at the end of its service life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging. [. . . ]