User manual GRUNDIG DSR 2530

[. . . ] DIGITAL SATELLITE RECEIVER DSR 2530 DEUTSCH ENGLISH CONTENTS ____________________________________________ 4 4 4 5 General information Packing contents Digital satellite reception Special features of your digital receiver 6 7-9 7 8 9 Set-up and safety Overview The front of the digital receiver The back of the digital receiver The remote control 10-11 10 10 10 11 11 11 11 Connection and preparation Connecting the satellite antenna Connecting the television Connecting a video recorder Connecting an AV receiver or hi-fi system Connecting a digital multi-channel amplifier Connecting the power cord Inserting batteries in the remote control 12-21 12 13 14 15 16 17-18 19 20-21 Settings The menu Assigning preset stations Editing the station list Editing the list of favourite stations Setting the local time Adjusting the digital receiver to the television set Adjusting the digital receiver to the LNB configuration of the satellite antenna Audio settings 22-24 22 22 22 22 23 23 23 24 24 Basic functions Switching on and off Mode selection Selecting preset channels Adjusting the volume Muting the sound Selecting stations from lists Switching from the current station to the previous one TV Guide Subtitles 25-26 25 25-26 Teletext mode Teletext Additional functions 2 CONTENTS _________________________________________________ 27-31 27 27 28 28 29 30-31 Additional functions Setting the menu language Deleting stations automatically Preset satellite stations Automatic station search Manual station search Timer functions 32-33 32 32 33 Special settings Resetting the digital receiver to its original state Updating the digital receiver software Selecting the remote control level 34-36 34 34 34 35 35 36 37 Information Displaying station reception properties Displaying device information Connecting the digital receiver to a PC Technical data Environmental note Troubleshooting Additional information for units sold in the UK ENGLISH 3 GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 DSR 2530 Digital Satellite Receiver Tele Pilot 766 S remote control Two batteries for the remote control (2 x 1. 5 V, Mignon, e. g. UM-3 or AA) Euro/AV (Scart) cable Power cord Operating manual Digital satellite reception In order to use your new DSR 2530 digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the required satellites (for example Astra and EutelSat/Hotbird). Unlike analogue satellite broadcasting, digital TV or radio stations are not all assigned their own frequencies; instead, several TV and/or radio are "transmitted" by a single transponder. To help you with the choice and settings for satellite stations, a selection of TV and radio stations have already been programmed for you. [. . . ] To run through the channels, press and hold down »P+« or »P-«. Enter single-digit or multi-digit preset channel numbers by pressing »1 . . . ­ Channels with no stations assigned are ignored. Note: Every time you switch stations, the current channel number, the name of the station, the time, and the titles, start and finish times of the current and following programmes are shown on the screen If there is another language or digital audio effects for the current programme, you will also see this information. In the »Sound« menu, you can choose the language or the digital audio effects. Open the »Sound« menu by pressing »F«. Adjusting the volume You cannot change the volume in menu mode. 1 Adjust the volume by pressing » « or » «. ­ A volume scale is shown on the television screen. Note: Volume changes adjust the audio signals at the »TV«, »VCR« and »AUDIO OUT« sockets on the digital receiver. 22 BASIC FUNCTIONS ______________________________________ Muting the sound 1 2 Press »d« on the remote control to mute the sound. Press »d« on the remote control to switch the sound on again. ­ You can hear the sound at the volume previously set. Selecting stations from lists You can select stations from various lists (e. g. 1 2 3 4 5 Press »OK« to open the station list. ­ The most recently activated station list appears. To change the station list, press »?« and press »P-« or »P+« to select the list you want. Press » « or » « to scroll through the lists. Press »P-« or »P+« to select the station and press »OK« to call it up. Press »i« to quit the station list. Switching from the current station to the previous one The digital receiver remembers the station which was last selected, provided it was selected for at least one second. 1 2 Press »z« to switch from the current station to the previous one. Press »z« to switch back to the current station. Note: You can only switch over when no menu is shown on the screen. 23 ENGLISH BASIC FUNCTIONS ______________________________________ TV guide The TV guide provides information on the current station such as the title and descriptions of the current and next programmes. 1 TV Guide 9:15 - 9:30 9:30 - 10:00 10:00 - 10:18 10:18 - 10:34 10:34 - 11:00 11:00 - 11:31 11:31 - 12:00 12:00 - 12:20 12:20 - 12:39 12:39 - 13:00 Press »TV-G« to view the station information. ­ All today's programmes are shown. [. . . ] Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging. Please find out about collection points operated by your local authority. [. . . ]