User manual GRUNDIG DSR 3735 CI

[. . . ] DIGITAL SATELLITE RECEIVER DSR 3735 C I CONTENTS_________________________ 4-5 4 4 4 5 5 General information Packing contents Receiving digital satellite channels What is Common Interface?HDMI transmission Special features of your digital satellite receiver 6 7-8 7 7 8 Set-up and safety Overview The front of the digital satellite receiver The back of the digital satellite receiver The remote control 9-12 9 9 10 10 11 12 12 Connection and preparation Connecting the antenna Connecting the television Connecting the digital multi-channel amplifier or the digital two-channel audio system Connecting the DVD recorder or video recorder Inserting the common interface module Connecting the power supply unit Inserting batteries in the remote control 13-20 13 14 15 16-17 18-20 Basic settings The menu Initial setup Settings stations, Option 1 Settings stations, Option 2 Editing favourites lists 21-23 21 21 21 21 22 22 22 22 22 23 Basic functions Switching on/off Mode selection Selecting preset - directly Selecting stations from lists Switching from the current station to the previous one Adjusting the volume Muting the sound Displaying the time Using options Electronic TV guide 24 24 24 Teletext mode Teletext basic functions Additional functions 25-32 25-27 27-28 29-30 31-32 Settings Picture settings Language settings Menu settings Miscellaneous settings 2 CONTENTS_________________________ 33 34-35 34 35 The recording timer Additional functions Security functions Conditional Access 36-40 36-38 38-39 40 40 Special settings Searching for new stations LNB settings Resetting the digital receiver to its original state Updating the digital receiver software 41-44 41 41 42 43 44 Information Displaying station reception properties Displaying device information Technical data Troubleshooting Environmental note ENGLISH 3 GENERAL INFORMATION __________ Packing contents 1 Digital Satellite Receiver DSR 3735 CI 1 5 2 Tele Pilot 766 S remote control 3 2 batteries for the remote control (2 x 1. 5 V, AA type batteries) 4 Operating manual 5 Power supply unit 6 EURO-AV (SCART) cable 7 2 3 4 7 HDMI cable 6 Receiving digital satellite channels In order to use your new DSR 3735 CI digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the satellites (for example Astra and EutelSat/Hotbird). Unlike broadcasts of analog satellite channels, not every digital TV or radio station is assigned to one transmission frequency, but several TV and/or radio stations are broadcast by one transponder. To help you with the choice and settings for satellite channels, a selection of TV and radio stations have already been programmed for this device. [. . . ] 2 Press »P-«, »P+«, » « or » « to select the programmes. Notes: You can switch directly to the morning, afternoon or evening programmes using the coloured buttons. 3 Press »?« to call up information on the selected programme. Press »P-« or »P+« to scroll to the next page of selected station information. Press » « or » « to select the information for the previous/next programme. Press »Z« to switch off information. Press » « and »OK« to add the selected programme to the recording timer. (See the section on the recording timer on page 33). Press »Z« to exit the electronic programme guide. 4 5 23 ENGLISH TELETEXT MODE ___________________ Teletext basic functions 1 2 Select the television station whose teletext pages you want to see. Open the teletext with »TXT«. ­ After a short time, teletext page 100 appears on the television screen. Note: You may also have to press »OK« to display the teletext. 3 4 Select the teletext page with »1. . . 0« or the coloured buttons. Scrolling text pages: Press »P-« to go to the previous page, press »P+« to go to the next page, press »F « to go forward 100 pages, press » « to go back 100 pages. Press »TXT« to activate mix mode. ­ The teletext is superimposed on the television picture. To switch off the teletext, press »TXT« again. 5 6 Additional functions Selecting a teletext page directly Most main pages display three digit page numbers that you can select directly. 1 2 Press » « or » « to select the page number. ­ There is a cursor on the first or last page number. Open the teletext page with »OK«. Increasing the character height If you have difficulty reading the text on the screen, you can double the character height. 1 To enlarge the character height of a teletext page, press »A/B«. Opening the station overview 1 Open teletext page 300 with »TV-G«. 24 SETTINGS __________________________ Picture settings 1 2 3 Press »i« to open the main menu. Press »P-« or »P+« to select the »Box Settings« line and press »OK« to confirm. [. . . ] Select »Channel Information« with »P-« or »P+« and press »OK« to confirm. ­ The »Channel Information« menu appears. Notes: The signal strength not only depends on the settings of your receiver unit, but also on the channel which is currently active. Remember this when aligning your antenna using the signal level display. [. . . ]