User manual GRUNDIG DSR 5450 HD

[. . . ] DIGITAL SATELLITE RECEIVER DSR 5450 HD DEUTSCH ENGLISH CONTENTS _________________________________________ 4-6 4 4 4 5 6 General information Packing contents Grundig accessories for satellite receivers Receiving digital stations Special features of your digital receiver What is Common Interface? 7 8-9 8 9 Set-up and safety Overview The front of the digital receiver The back of the digital receiver 10-12 10 11 12 12 The remote control Television mode PVR mode Photo album MP3 function 13-14 13 13 13 13 13 14 14 14 14 Connection and preparation Connecting two satellite antennas or LNCs Connecting one satellite antenna or LNC Connecting the television Connecting a video recorder Connecting an AV receiver or hi-fi system Connecting a digital multi-channel amplifier Connecting a PC Connecting the mains cable Inserting batteries in the remote control 15-19 15 16-19 Basic settings The menu Assigning preset stations 20-24 20 21-23 24 Settings Parental lock Editing the station list Receiving encoded satellite stations 25-27 25 25 25 25 26 26 26 26 27 Basic functions Switching on and off Mode selection Selecting preset channels Adjusting the volume Muting the sound Selecting stations from lists Switching from the current station to the previous one Selecting the audio channel Electronic programme guide (EPG) 2 CONTENTS _________________________________________________ 28-42 28 29-32 33-34 35 36 37-39 40-42 Personal Video Recorder The hard disk Recording Playback Editing the PVR list Decoding programmes Photo album MP3 function 43-48 43 44 45 46 47-48 Additional functions Custom settings Timer functions Editing stations Editing transponders Editing satellites 49-52 49-50 51 52 Antenna settings Setting for a fixed antenna Setting for a motorised antenna Setting for an antenna with USALS system 53-55 53 53 54 54 55 55 Special settings Copying stations Deleting all stations Resetting the receiver to the original state Updating the digital receiver software Displaying device information Connecting the digital receiver to a PC 56-59 56-58 59 Information Technical data Troubleshooting ENGLISH 3 GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 7 DSR 5450 HD Digital Satellite Receiver RC 54 S remote control Two batteries for the remote control (2 x 1. 5 V, Micro, e. g. LR 03 or AAA) Euro/AV (Scart) cable USB cable Loop-through cable Operating manual Grundig accessories for satellite receivers Your specialist dealer will be happy to tell you about the comprehensive range of GRUNDIG accessories for satellite receivers. Receiving digital stations This DSR 5450 HD digital receiver can play digital satellite stations. To operate it you need a digital satellite antenna, which must be installed and directed at the required satellite (for example Astra and EutelSat/Hotbird). Unlike analogue broadcasting, digital TV or radio stations are not all assigned their own frequencies; instead, several TV and/or radio are "transmitted" by a single transponder. [. . . ] Select »Record Timer Setting« with »CH « or »CH press »OK« to confirm. ­ The »Record Timer Setting« menu appears. « and 3 Press »CH « or »CH « to select the timer and then press »GREEN«. ­ The menu for entering timer data appears. Make the changes as required. 4 5 6 Press »EXIT« to finish the setting. 31 ENGLISH To finish the setting, press »CH « or »CH and press »OK« to confirm. ­ The recording timer is now modified. « to select »Store« PERSONAL VIDEO RECORDER ______________________ Deleting a timer You can delete programmed timers. 1 2 In the main menu, select the »PVR Setup« submenu by pressing »CH « or »CH « and press »OK«. Select »Record Timer Setting« with »CH « or »CH press »OK« to confirm. ­ The »Record Timer Setting« menu appears. Press »BLUE« to activate the delete function. Press »CH « or »CH « to select the timer and press »OK« to confirm. To confirm the deletion press »BLUE« and then » » VOL« to select »Yes« and »OK« to confirm. Press »EXIT« to finish the setting. VOL« or « and 3 4 5 6 Time shift This recording method allows you to interrupt the current programme and watch it later from that point onward. 1 Press »$« during the programme. ­ The digital receiver freezes the frame and starts recording. ­ You can record up to 90 minutes of the current programme. To resume the programme, press »$« or »4«. ­ The system continues recording the programme while you are watching it. Press »5« to end the time shift function. ­ The message »Do you want to store timeshift?« appears. Press » VOL« or » VOL« to select »Save« (the programme is saved on the hard disk), »Discard« (the programme is deleted) or »Return« (time shift is continued) and press »OK« to confirm. [. . . ] You can use this connection for software updates and for uploading and downloading other data. You can find more information on the internet at www. grundig. com. 55 ENGLISH INFORMATION_____________________________________ Technical data It complies with the standards required for CE labelling. 1. Front Ends 1. 1 Satellite A Input connector Output connector Frequency range Input impedance Signal level LNB power & polarization 22 kHz tone Demodulation Input symbol rate FEC decoder 1 x F type 1 x F type 75 Ohm, IF signal out 950 MHz to 2150 MHz 75 Ohm -25 to -65 dBm Vertical 13. 5 V ± 1 V Horizontal 18. 5 V ± 1 V Frequency 22 kHz ± 2 kHz Amplitude 0. 6 V p-p ± 0. 2 V p-p QPSK 2 ~ 45 Msps Convolutional code rate 1/2, 2/3, 3/4, 5/6 and 7/8 with constraint Length M=7 1 x F type 1 x F type 75 Ohm, IF signal out 950 MHz to 2150 MHz 75 Ohm -25 to -65 dBm Vertical 13. 5 V ± 1 V Horizontal 18. 5 V ± 1 V Frequency 22 kHz ± 2 kHz Amplitude 0. 6 V p-p ± 0. 2 V p-p QPSK 2 ~ 45 Msps Convolutional code rate 1/2, 2/3, 3/4, 5/6 and 7/8 with constraint Length M=7 1. 2 Satellite B Input connector Output connector Frequency range Input impedance Signal level LNB power & polarization 22 kHz tone Demodulation Input symbol rate FEC decoder 2. MPEG transport stream A/V decoding Transport stream Profile & level Input T/S data rate Aspect ratio Video resolution Audio decoding Audio mode Sampling rate MPEG-2 ISO/IEC 13818 Transport stream specification MPEG-2 MP @ ML 80 Mbit/s max. [. . . ]