User manual GRUNDIG DTR 1560-2 MICRO

[. . . ] DIGITAL SATELLITE RECEIVER DTR 1560-2 MICRO CONTENTS ____________________________________________ 4 4 4 4 General information Packing contents Receiving digital stations Special features of your digital receiver 5 6-7 6 6 7 Set-up and safety Overview The digital receiver The infrared receiver The remote control 8-9 8 8 8 9 9 Connection and preparation Connecting the antenna Connecting the television Connecting the infrared receiver Connecting the mains adapter Inserting batteries in the remote control 10-13 10 11 12-13 Upgrading the television Connecting the GRUNDIG television with G2 chassis (Digi 200) Installing on the GRUNDIG television set Operating the GRUNDIG television remote control 14-17 14 15-16 17 Basic settings The menu Searching for stations Editing the station list 18-20 18 18 18 18 19 19 19 19 20 Basic functions Switching on and off Mode selection Selecting preset channels Using the options Adjusting the volume Muting the sound Selecting stations from lists Switching from the current station to the previous one TV guide 21 21 21 Teletext mode Teletext Additional functions 22-27 22-23 23-24 25-26 26-27 Settings Picture settings Language Settings Menu settings General settings 2 CONTENTS ____________________________________________ 28-31 28 29 30 31 Additional functions Automatic station search Manual station search Timer functions Safety 32-33 32 32 33 Special settings Resetting the receiver to its original state Updating the digital receiver software Changing remote control levels 34-37 34 34 35 35 36 37 Information Displaying station reception properties Displaying device information Technical data Environmental note Troubleshooting Additional Information for units sold in the UK. ENGLISH 3 GENERAL INFORMATION __________________ Packing contents 1 2 3 4 5 6 7 DTR 1560-2 MICRO Digital Satellite Receiver Tele Pilot 766 S remote control Two batteries for the remote control (2 x 1. 5 V, Mignon, e. g. UM-3 or AA) Euro/AV (Scart) extension Mains adapter Infrared receiver Instruction Manual Receiving digital stations To use your new DTR 1560-2 MICRO digital receiver you need a digital outdoor or indoor antenna. Unlike analogue broadcasting, not every station has its own transmission frequency. Instead, several stations are grouped into what are known as bouquets on a regional or national level. [. . . ] Press »P-« or »z « to scroll back a page. Press »P+« or » « to scroll to the next page. Press »F « to scroll forwards 10 pages. Press » « to scroll backwards 10 pages. Press »TXT« to activate mix mode. ­ The teletext is superimposed on the television picture. To switch off teletext, press »TXT« again. Additional functions Selecting a teletext page directly Most main pages display three digit page numbers that you can select directly. 1 2 Select the page number with » « or » «. ­ There is a cursor on the first or last page number. Press »OK« to call up the teletext page. Increasing the character height If you have difficulty reading the text on the screen, you can double the character height. 1 To enlarge the character height of a teletext page, press »A/B«. 1 Open teletext page 300 with »TV-G«. 21 ENGLISH Calling up the station overview SETTINGS ______________________________________________ Picture settings 1 2 Press »i« to open the main menu. Select »Box Settings« by pressing »P+« or »P-« and press »OK« to confirm. ­ The »Box Settings« menu appears. Select »Video Settings« with »P-« or »P+« and press »OK« to confirm. Note: Additional operations are explained in the following sections. 3 Selecting the television picture format If you have a 16:9 format television or flat screen, select the »16:9/Widescreen TV« setting. If you have a 4:3 format television or flat screen, the following settings are available: »4:3 (Pan&Scan/CCO)« for wide-screen playback without black bars on the top and bottom edges of the screen. The picture is cropped on the left and right. »4:3 (Letterbox 14:9)« and »4:3 (Letterbox 16:9)« for widescreen playback, with black bars at the top and bottom of the television screen. 1 2 Select »Screen Format« with »P-« or »P+«. Press » « or » « to select the screen format. Specifying the video signal at the Euro AV (TV) output You can choose »Video (CVBS)« (normal picture quality), »RGB« (high picture quality) or »S-Video (Y/C)«. The default setting is »RGB«. 1 2 Select »TV Output Format« with »P-« or »P+«. Select the video signal with » « or » «. Selecting AFD The transmitted screen format can differ from the displayed screen format. [. . . ] This is indicated by this symbol on the product, in the operating manual and on the packaging. Please find out about collection points operated by your local authority. Help protect the environment by recycling used products. 35 ENGLISH INFORMATION_____________________________________ Troubleshooting If a fault occurs, first refer to this information before you take the digital receiver for repair. If you are unable to rectify the fault using the information given here, contact your local dealer or service specialist. [. . . ]