User manual GRUNDIG GPF 800

[. . . ] Place the device on a hard, level surface. Do not place any objects such as newspapers on the digital picture frame or put any cloth or similar items underneath it. Do not place the device close to heating units or in direct sunlight, as this will impair cooling. Do not place any vessels, such as vases, on the device as they may tip over and spill the liquid, which poses an electrical hazard. [. . . ] All currently-known MP3 chip concepts were taken into account when it was developed. Due to rapid progress in MP3 technology and new manufacturers appearing every day, the compatibility of MP3 players/USB memory sticks can only be partially guaranteed. If USB operation is impaired or is not possible, this does not indicate a malfunction of the digital picture frame. Note: Bi-directional data transfer as defined for ITE devices in EN 55022/EN 555024 is not possible. USB transfer is not in itself an operating mode. It is only an additional function. Connecting earphones or headphones 1 Plug the head/earphones into the »U« socket on the digital picture frame. ­ The loudspeakers of the digital picture frame will be switched off automatically. Note: Prolonged listening at loud volumes with headphone or earphones can damage your hearing. 17 ENGLISH ( CONNECTION AND PREPARATION ---Changing the front bars There are three pairs of front bars supplied in the colours silver, red and white. 1 Remove the front frame by pushing both the locks »LOCK« on the rear panel of the device to the right or left, pressing the frame forwards and removing. 2 Remove the front bars from the front frame by pressing on each of them through the respective opening ­ if necessary, use a suitable object. 3 Place the front frame accurately onto the holders on the upper edge of the picture frame again. 18 CONNECTION AND PREPARATION ---4 Fit the picture frame into the lower edge of the front frame and push both the locks »LOCK« to the left or right on the rear panel of the device. 5 Insert one pair of the front bars (colours silver, red and white) supplied at delivery accurately into the recesses in the front frame (the front bars grip magnetically). Note: When attaching the lower front bar, make sure that the opening in the bar is located exactly in front of the infrared sensor for the remote control signals. 2 Press » « on the remote control to switch the digital picture frame to standby. 8 8 Adjusting the volume 1 Press »VOL +« or »VOL ­« on the remote control to adjust the volume during playback; or adjust the volume on the device using »a« or »s«. Selecting options in the main menu (without data storage medium) 1 1 Press »MENU« to open the main menu. 2 Switch off background music using » «. 23 ENGLISH PICTURE PLAYBACK -------------------------------------------------------------Picture playback ­ basic functions 1 Starting picture playback 1 Press »MENU« to open the main menu. 2 Select the symbol of the required data medium, e. g. »USB«, by pressing »a« or »s« and activate using »OK«. Photo 3 Select the »Photo« symbol using »a« or »s« and activate using »OK«. ­ The first 9 pictures stored are displayed as inset pictures. Note: If more than 9 pictures are stored, you can switch to the next pages of the inset picture display using »S«. 4 Select the picture by pressing »a« or »s« or »A« or »S« and open using »OK«. ­ The inset picture appears in full screen. The pictures are then automatically displayed as full images one after the other (slide show). II 5 Press »e/II« to pause playback. 6 Resume playback with »e/II«. 7 Press »7« to switch back to the inset picture display; or open the picture playback directly using »PHOTO«. ­ The picture playback starts automatically as a slide show. Rotating pictures You can rotate pictures by 90°. 180° 1 During playback, press »ROTATE« on the remote control repeatedly to rotate the pictures by 90°. [. . . ] 4 Press »A« or »S« to select the hour and confirm using »s«. 5 Press »A« or »S« to select the minutes and confirm using »s«. s 1 OSD language Change picture Picture transition Picture format Date/Time Alarm Switch-off time Brigthness English 3s Random Normal 2008 09 26 10:14 00:00 Off 00:00 On 8 6 Press »A« or »S« to select the »On« setting and confirm using »OK«. ­ The digital picture frame automatically switches to standby at the set time; or deactivate the switch-off timer by pressing »A« or »S« to select the »Off« setting and confirm using »OK«. s 30 PREFERENCES -----------------------------------------------------------------------------------Setting the alarm 1 OSD language Change picture Picture transition Picture format Date/Time Alarm Switch-off time Brigthness English 3s Random Normal 2008 09 26 10:14 00:00 Off 00:00 Off 8 If the alarm is set, it will also function in standby mode. The alarm emits an acoustic signal at the set time. [. . . ]