User manual GRUNDIG GV 500 SV

[. . . ] VIDEORECORDER GV 500 SV Installation and Safety Precautions Connecting The Remote Control 2 3 4-5 TIMER Recording 17-20 The options . 17 Programming with the ShowView system, variant 1 . 19 Checking the occupied TIMER positions . 19 Altering the data of a TIMER position . [. . . ] Store the setting using the G button. ¢ ¢ 2 3 Ì Locating a tape position The starting point is the current tape position. Search is possible to the 9 previous or 9 following marks. Ì Optimizing the picture/sound quality for cassettes recorded on another recorder If the picture jumps or scrolls when playing back tapes recorded on another recorder, press the CODE button, the numbered buttons 8 5 1 1 and the G button. ­ Brief display on recorder: » O N «. Press the ­ Display on recorder: » INDEX « and a number. ­ Display on screen: » INDEX « and a number. ¢ 2 Ì 1 Optimizing the freeze-frame picture If the picture jitters or flickers during the freezeframe playback function it can be optimized. Press the h button when the freeze-frame picture is on the screen. Use the D button to select the » Jitter Adjustment « line and call it up using the G button. ­ Display on recorder: » JITTER «. ­ Display on screen: » JITTER ADJUSTMENT «. Use the D or C button to adjust the picture to the best subjective quality and then press the G button. Use the numbered buttons 1. . . 9 to enter a number ­ for the mark 1 to 9 ­ an then press the Y or X button, or turn the shuttle ring to the left or right. ­ The tape is wound to the selected mark and playback is started there. Ì 1 2 Erasing a mark from the tape Press the 2 ¢ INDEX button. 3 Use the numbered buttons 1. . . 9 to enter a number ­ for the mark 1 to 9 ­ and then press the Y or X button, or turn the shuttle ring to the left or right. ­ The tape is wound to the selected mark and playback is started there. ­ Flashing display on recorder: » INDEX «. While the » INDEX « display is flashing it is possible to erase the mark using the INDEX ERASE button. ­ Display on recorder: » INDEX ERASE «. ­ Display on screen: » INDEX ERASE «. Ì Optimizing the picture definition (Automatic Contour Control Plus) After having inserted a cassette and started playback, the recorder adjusts automatically for optimal picture definition. 3 ¢ 14 At a glance 6 5 1 7 PROG. DAY START STOP SET/CHEC K CLEAR TIMER SP/LP SV/V+ 1 4 7 VPT 2 5 8 0 3 6 9 AV 1 + OK + 1 3 4 7 2 2 4 3 6 Ì 1 2 Preparation Switch the TV set on. Select the programme position for the video recorder at the TV set (AV programme position). Insert a cassette with sufficient playing time into the cassette compartment. 5 DE X IN D T RA C G KIN EX M AR K A INDE X ER SE 3 Ì 1 Operation Select programme position, step by step using the DC buttons on the remote control or the a b buttons on the recorder; directly using the numbered buttons 1 . . . For two-digit programme positions, press the second numbered button directly after the first. To do this press the K button on the remote control or the M button on the recorder for a longer period. Select recording pause using the W button on the remote control or the U button on the recorder. [. . . ] The ON/OFF button was not pressed after an interruption of the record stand-by mode ( TIMER flashes). Cover the opening at the back of the cassette with adhesive tape. Timer recording was not carried out. ¢ Poor picture quality during playback. The TV set is not correctly tuned to the transmitting channel of the video recorder. The video heads are dirty. Correctly tune the TV set to the transmitting channel of the recorder. Have the video heads cleaned by a specialist. Insert new batteries. The video heads are worn. Operation with the remote control is not possible. [. . . ]