User manual GRUNDIG GV 540 HIFI NOIR

[. . . ] VIDEORECORDER GV 540 HiFi r r r Installation and Safety Precautions Connecting The Remote Control 2 3 4-5 r TIMER Recording 18-21 The options . 18 Programming with the ShowView system, variant 1 . 20 Checking the occupied TIMER positions . 20 Altering the data of a TIMER position . [. . . ] Enter the desired programme as a one- or two-digit number using the numbered buttons 1 . . . Start the » new « recording using the W button on the remote control or the U button on the recorder. ­ During playback you will see seamless transitions without flaws. 2 r 1 Sound level control, automatic/manual After the programme has been selected, the recorder automatically adjusts the sound level. If you wish to control the sound level manually, press the MAN button on the recorder. ­ Display on recorder: » MAN « and »L E V E L I 0 «. 2 3 4 ¢ ­ LEVEL + buttons on the recorder to Use the adjust the sound so that the red mark (+ 0 dB) lights up during the loudest passages. MAN button again you can return By pressing the to automatic sound level control. ¢ 3 ¢ Recording 17 The hifi or helical track is for stereo and two-channel recordings. The options for TIMER programming TIMER Recording The recorder can be programmed to record at a later date. r Programming a number of TV programmes on one day If you wish to record a number of TV programmes on one day, you must decide which one is to be recorded completely if there is a risk of alterations to timing. r You can programme: ­ Six broadcasts over a period of 31 days, ­ Daily or weekly broadcasts with the same starting time, ­ With or without VPS/PDC control. ­ with standard or long playing time. Example: You wish to record the 1st station from 20:15 to 21:45 Uhr and the 2nd station from 21:50 to 22:30. But the programme from the 1st station is extended by 15 minutes. The recorder records this programme until 22:00, controlled by the VPS/PDC signal. Only then does it switch to the second station. So 10 minutes of the second programme are missing. If the programme from the 2nd station is to be recorded from the beginning you must delete VPS/PDC control when programming the 1st station. The length of the recording is then controlled by the switch-on and switch-off times. Recording of the 1st station then ends at 21:45. And recording of the 2nd station starts at 21:50. r r You can choose from two variants: 1. With the user guide and manual data entry. VPS/PDC ­ the Video Programme System VPS/PDC control when programming recording guarantees that your desired broadcasts are always recorded completely. Incorrect recording resulting from programme alterations no longer occurs. r Notes on TIMER programming with VPS/PDC Many TV stations broadcast an additional programme-related signal (VPS/PDC signal) which indicates the start and duration of each individual TV programme. It is therefore important when programming the recorder to enter the switch-on and switch-off times to the exact minute. If TV programmes are altered or moved, special VPS/PDC times are indicated in the programme over-views. They must be entered instead of the normal starting times. The recorder recognizes these alterations and is switched on at the actual start of the programme and switched off at the actual end of the programme. r Programming all evening programmes on one day You wish to record all the evening programmes on ARD (for example Saturday starting at 20:15, entertainment programme, winning Lotto numbers, film). [. . . ] The ON/OFF button was not pressed after an interruption of the record stand-by mode ( TIMER flashes). Cover the opening at the back of the cassette with adhesive tape. Timer recording was not carried out. ¢ Poor picture quality during playback. The TV set is not correctly tuned to the transmitting channel of the video recorder. The video heads are dirty. Correctly tune the TV set to the transmitting channel of the recorder. Have the video heads cleaned by a specialist. Insert new batteries. The video heads are worn. Operation with the remote control is not possible. [. . . ]