User manual GRUNDIG GV 560 HIFI

[. . . ] VIDEORECORDER GV 560 HiFi r r r Installation and Safety Precautions Connecting The Remote Control 2 3 4-5 r TIMER Recording The options 20-24 . 20 Programming with the ShowView system, variant 1 . 22 Checking the occupied TIMER positions . 22 Altering the data of a TIMER position . [. . . ] The remaining playing time is displayed briefly. The recorder is in record stand-by mode. All drive mechanism functions of the recorder are now "locked". ¢ ShowView n- - - - - - - - ED 0-9 : Enter number : ED/EW/Normal CLEAR : Delete last digit SV/V+ : New Input OK : Confirm number i : Return ! 2 Enter the ShowView number for the desired TV programme using the numbered buttons 1 . . . In case of an error, the last digit of the ShowView number can be deleted using the CLEAR button. !! ¢ The entire ShowView number can be deleted using the SV/V+ button. ¢ · TIMER Recording 21 All you have to do is activate the ShowView system by pressing a button, enter the ShowView number code ­ indicated in the TV magazine ­ and confirm the entry. 3 Confirm the ShowView number using the G button. ­ The recorder transforms the ShowView number into the actual recording data. r Recorder messages These indicate various operating states and errors. The messages appear on the TV screen or in the display on the recorder. r 1 Checking the occupied TIMER positions Press the SET/CHECK button. ­ The » Record Programming « table appears. After a short time the recorder switches the table off automatically and returns to record stand-by mode. ¢ TIMER Recording ! Remaining playing time Dispaly: » Rest « » REST « and the remaining playing time of the cassette. If the » Rest « is negative (­) and marked in red, a cassette with insufficient playing time was inserted, or the sum of all TIMER recording times is too high. r 1 2 Altering the data of a TIMER position Press the SET/CHECK button. ­ The » Record Programming « table appears Select the required TIMER position. To do this, press the SET/CHECK button as often as necessary, until the coloured marker is at the required TIMER position. ¢ Record length Display: » Record length « » REST ­ : ­ ­ «. The cassette playing time was not recognized. 3 ¢ No Cassette Display: » No Cassette « » NO CASSETTE «. 4 Alter data using the B PROG. , B DAY, B START, B STOP buttons. Store the setting using the G button. Cassette Protected Display: » Cassette Protected « » PROTECTED «. The cassette is protected against re-recording. It is ejected automatically. r 1 Deleting an occupied TIMER position Press the SET/CHECK button. ­ The » Record Programming « table appears. To do this, SET/CHECK button as often as necessary, press the until the coloured marker is at the required TIMER position. ¢ Collision Display: » Collision « » COLL «. The affected TIMER positions are marked in red. The recording times of the TIMER positions overlap. [. . . ] After interruption of record stand-by mode, the TIMER ON/OFF button was not pressed ( TIMER flashes). Timer record programming was not carried out. ¢ The quality of the playback picture is poor. The TV set is not correctly tuned to the transmitting channel of the video recorder. The video heads are dirty. Tune the TV set correctly to the transmitting channel of the video recorder. Have the video heads cleaned by a specialist. Insert new batteries. The video heads are worn. [. . . ]