User manual GRUNDIG GV 740 SV HIFI NOIR

[. . . ] VIDEORECORDER GV 740 HiFi TIMER Recording 23-28 The Remote Controls 6-8 The RP 7 Compact Remote Control . 6 The RP 500 Convenience Remote Control . 7-8 Programming with the teletext pages of TV stations, variant 2 . 27 Programming with the user guide and manual data entry, variant 3 . [. . . ] How to do this is described in the chapter "Setting a programme position for the ShowView System" on the next page. ShowView 1 2 I- - - - - - - - ED Preparation Switch the TV set on. Select the AV programme position for the video recorder on the TV set. If the recorder is connected to a TV set with Megalogic functions, the TV set switches itself on when the > SV/V+ is pressed and the AV programme position is displayed automatically. 2 0-9 : Enter number : ED/EW/Normal CLEAR : Delete last digit SV/V+ : New input OK : Confirm number i : Return Use the numbered buttons 1 . . . 0 to enter the ShowView number of the desired TV programme. If incorrect entries are made, the > CLEAR button can be used to delete the last digit of the ShowView number. The complete ShowView number can be deleted using the > SV/V+ button. 3 Insert a cassette with sufficient playing time, pay attention to erase prevention. The time and date at the recorder must be correct. 3 ! Confirm the ShowView number using the G button. ­ The recorder converts the ShowView number into the actual recording data. GRUNDIG TEXT-PROGRAMMING Timer I I I I I I Prog. Start 22:30 --:-Stop 23:00 --:-- * +/­ : Enter timer data : VPS/PDC Off/On : ED/EW/Normal LP/CL : Long play / Clear timer VPT : Program with TEXT OK : Activate timer i : Return to Info menu 4 Confirm programming using the G button. ­ The data of the programme is stored at the first memory position (TIMER). The remaining playing time is indicated briefly. All drive mechanism functions of the recorder are now "blocked". ­ Display on recorder: » TIMER «. ­ The red display on the recorder lights up. To programme further TV programmes first press the > TIMER ON/OFF button then repeat the procedure ! ! 24 Additional functions The entries for these functions must be selected according to step 3 of the example. ­ If the recording is to be made without VPS/PDCcontrol, press the > VPS/PDC (red) button. The star (*) in the table indicates recording with VPS/PDC control. ­ If the programme is to be recorded daily or weekly at the same time, press the Z ED/EW (green) button once or twice. The function "daily" cannot be used for recordings on Saturday or Sunday. ­ If the recording is to be made in long-play mode, press the ¢ SP/LP button. [. . . ] Press the > TRACKING button during playback and keep it pressed for a few seconds. The video heads are cleaned, the playback picture cannot be seen during this time. Switch on recorder with the , button on the recorder. Insert new batteries. The video heads are worn. [. . . ]