User manual GRUNDIG KVA 4830

[. . . ] This section includes the safety instructions that will help providing protection against personal injury and material loss risks. Failure to follow these instructions invalidates the granted warranty. Contact with live wires or components could lead to serious injury or even death!Observe the following safety precautions to avoid electric shocks: Do 77 not use the coffee machine if the connecting cable or mains plug are damaged. [. . . ] You can memorize your desired volume of coffee for both strong espresso and mild espresso and also the hot water from 25ml to 250ml. When making your coffee (either strong espresso or mild espresso) or dispensing hot water, press and hold the button you selected. The appliance will continue to make the cup of coffee. When the volume of coffee meets your desired volume, release the button. Two beep sounds will be heard indicates that the volume of coffee is being memorized. 77You can reset the volume of coffee back to the factory setting by selecting the default setting. The appliance can dispense hot water by simply pressing the hot water button. The hot water button and the illumination will lights up indicates that the appliance is heating up the water. When the hot water button and the illumination turn off, the water is ready to serve. The machine has two different setting: default setting, ECO mode and speed mode. In ECO mode, the appliance helps to save more energy. In speed mode, the user can make their coffee faster than in default setting. Illumination Light Pre-brewing* Auto shut off time Cup Volume memory Note 77The pre-brewing function moistens the grounded beans in the brewer with a small amount of water before full extraction. This expands the coffee grounds to build up a greater pressure in the brewer which help extraction of all the oils and full flavor from the grounded beans. 1 When the machine is in standby condition, press and holds the for 5 seconds. 2 The will then be flashing and the following button will have the following indications for different settings: 3 Press the hot water button for ECO mode, strong espresso button for speed mode and mild espresso button for default setting. Two Beep sound will be heard indicates that the mode is being selected. (Note: If you are pressing the relative lights on button for each mode, the machine will not response). 4 If you would like to remain the setting unchanged, press again or wait for 5 seconds for the machine to return to the standby condition 1 Disconnect the power cord from the mains supply outlet. 2 Pour away all the water in the internal and external drip tray 3 Use a damped cloth or non-scratching cleaner to clean the water stains on the appliance. Warning 77Never use any abrasive, vinegar or descaling agents not included in the box to clean the appliance. Timely cleaning and maintenance of the appliance is very important in prolonging the life of the appliance. [. . . ] notes 77No claims of any kind will be accepted For damage or injury resulting from use of the coffee machine for other than its intended purpose. 77The risk has to be borne solely by the machine owner. All technical information, data and instructions on installation, operation and maintenance of the coffee machine contained in these operating instructions represent the current status at the time of printing and are based on the best possible knowledge gained by experience and knowhow. No claims can be derived from the information, illustrations and descriptions in this user manual. [. . . ]