User manual GRUNDIG LUNA RP 9200 PLL

[. . . ] Activates the second preset level on preset buttons 1, 2, 3, 4, 5. In radio mode: press briefly to increase the frequency in steps of 50 kHz; hold down to start the automatic search forwards. [. . . ] Switching off the sleep timer 1 To switch off the sleep timer before the set time, press »SNOOZE«. 2 Use »UP/HOUR« to set the hours step-by-step (by pressing briefly) or continuously (by holding down). To activate the back light, press and hold down »LIGHT«. When the button is released, the back light goes out. When the buttons are disabled, »LOCK« appears in the display. As an exception, the back light for the display can be switched on with »LIGHT«. ­ Display: the automatic search stops at the next station with a strong signal. Note: If the reception is too weak, align the projectile antenna on the back of the device to obtain better reception. Do not use cleaning agents as they may damage the casing. Clean the device with a clean, moist leather cloth. You must make sure that the device is protected from moisture such as rain or water splashes. When deciding where to place the device, please note that furniture surfaces are covered by various types of varnish and plastic, most of which contain chemical additives. [. . . ] 4 To store more stations repeat steps 1 to 2 or 3. 5 Activate stations on the first preset level by pressing »1, 2, 3, 4« or »5«; or Activate stations on the second preset level by pressing »+5« and then »1, 2, 3, 4« or »5«. [. . . ]