User manual GRUNDIG MT 6740 MULTIHAARTRIMMERSET, A/N

[. . . ] Charging unit. I Extendable plug-in comb system suitable for both cutting widths, with precise trimming grade display for hair lengths of 2, 4, 6, 8, 10, 12, 14 and 16 mm. Shaving attachment with single blade foil for a smooth shave. Power supply unit. B C D J K E Other accessories 1 x two combs. 1 x oil for cutting head. F Accessories G Beard trimming attachment (width 30 mm). ENGLISH 19 POWER SUPPLY ___________________________________ Rechargeable battery operation When operating the appliance with the built-in nickel metal hydride battery, only use the power unit supplied for charging. [. . . ] The only way to disconnect the device from the mains is to unplug the power supply unit. 1 Plug the power supply unit into the socket E on the appliance. 2 Plug the power supply unit into the wall socket. Caution 7 When in the bathroom or beside a water connection, you must only use the appliance in battery mode; never run it from the mains. ENGLISH 21 OPERATION ________________________________________ Special features This appliance has four separate functions: ­ Function 1: precise hair trimming at a width of 38 mm. ­ Function 2: precise beard trimming at a width of 30 mm. ­ Function 3: hair or beard trimming with various cutting lengths (2, 4, 6, 8, 10, 12, 14, 16 mm) at widths of 38 mm or 30 mm. 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 2 Insert ceramic cutting head A carefully at the top and press down until it clicks into place. 3 Place a towel around the neck and shoulder of the person whose hair you are trimming. Function 1 Trimming hair . . . . . . using the ceramic cutting head A (width 38 mm). Switching on and off 1 Press the button C to switch on the appliance. 2 Press the button C to switch off the appliance. 22 ENGLISH OPERATION ________________________________________ 4 Make sure the person is seated so that their head is roughly at your eye level. Before trimming, comb the hair so that it falls naturally and you can see the direction in which it grows. Function 2 Beard trimming . . . . . . using the beard trimming attachment G (width 30 mm). 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 2 Insert beard trimming attachment G carefully at the top and press down until it clicks into place. 3 Loosen the beard hair by combing the beard in the direction the hair grows. ENGLISH 23 OPERATION ________________________________________ Function 3 Trimming hair or beards at certain cutting lengths . . . . . . 3 Push the extendable attachment H carefully and firmly onto the rounded rear half of the cutting head from above and let it click into place. 4 Adjust the cutting length (2, 4, 6, 8 or 10 mm) by pressing on the lock next to the cutting length display and then move the comb to the setting you want. 5 After use, remove extendable attachment H by pressing the locking tab at the back. 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 2 Insert attachment A (width 38 mm) or G (width 30 mm) carefully at the top and press down until it clicks into place. 24 ENGLISH OPERATION ________________________________________ Function 4 Close shaving . . . . . . Note 7 You can remove the single blade foil of the shaving attachment. To do this, press both side catches on the shaving attachment. [. . . ] If you clean the attachment under running water regularly but you also want to maintain the original condition of the cutting head for as long as possible, it is worth oiling it at regular intervals with the oil provided. ENGLISH 27 CLEANING AND CARE___________________________ Storage If you do not want to use the appliance for a long period of time, please store it carefully. 1 Make sure it is unplugged, has completely cooled down and all the accessories are completely dry. 2 Store the parts in the original box in a cool, dry place. 3 Make sure the appliance is kept out of reach of children. Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. [. . . ]