User manual GRUNDIG MT 6741

[. . . ] ENGLISH 7 7 7 18 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 19 OVERVIEW _______________________________ Dear customer, Congratulations on the purchase of your MT 6741 multi-hair trimmer. Read the following user notes carefully to ensure you can enjoy your quality product from Grundig for many years to come. The high-quality and professional styling appliances in the new product range fulfil the highest standards for salon results at home. Special features This appliance has five separate functions: ­ precise hair cutting at a width of 38 mm. ­ precise beard trimming at a width of 30 mm. [. . . ] 2 Plug the power cord into the socket on the charging unit. 3 Plug the power supply unit into the wall socket. Mains operation (with the power supply unit) Check that the voltage indicated on the type plate of the power supply unit corresponds to your local power supply. The only way to disconnect the appliance from the power supply is to unplug the power supply unit. 1 Insert the power cord into the socket E on the appliance. 2 Plug the power supply unit into the wall socket. Caution 7 When in the bathroom or next to a water connection, you must only use the appliance in battery mode; never run it from the mains. 22 ENGLISH 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 23 OPERATION ______________________________ Cutting hair . . . . . . using the ceramic/stainless steel cutting head A (width 38 mm). 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 3 Place a towel around the neck and shoulders of the person whose hair you are trimming. 4 Make sure the person is seated so that their head is roughly at your eye level. Before trimming, comb the hair so that it falls naturally and you can see the direction in which it grows. 5 Press the C button to switch on the appliance. 7 Press the C button to switch off the appliance after use. 2 Insert ceramic/stainless steel cutting head A carefully at the top and press down until it clicks into place. ENGLISH 23 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 24 OPERATION ______________________________ Beard trimming . . . . . . using the beard trimming attachment 9 (width 30 mm). Trimming hair or beards to a certain length . . . . . . Comb #1 Comb #2 Comb #3 Comb #4 Comb #5 Comb #6 Comb #7* 2 mm 4 mm 8 mm 12 mm 16 mm 20 mm 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 2 Insert beard trimming attachment 9 carefully at the top and press down until it clicks into place. 3 Loosen the beard hair by combing the beard in the direction the hair grows. 4 Press the C button to switch on the appliance. 6 Press the C button to switch off the appliance after use. * is designed for thinning out hair. 1 If necessary, remove the attachment by pressing in both side catches B and lifting off. 2 Insert attachment A (width 38 mm) or 8 (width 30 mm) carefully at the top and press down until it clicks into place. 24 ENGLISH 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 25 OPERATION ______________________________ Note 7 The comb attachments fit both cutting heads. 3 Push the comb attachment carefully and firmly onto the rounded rear half of the cutting head from above and let it click into place. 4 Press the C button to switch on the appliance. 6 Press the C button to switch off the appliance after use. [. . . ] Use a soft, dry cloth or the brush supplied to clean the appliance housing and the charging unit. 7 ENGLISH 27 02_MT6741_en 18. 08. 2010 9:57 Uhr Seite 28 CLEANING AND CARE_____________________ Storage If you do not want to use the appliance for a long period of time, please store it carefully. 1 Make sure it is unplugged, has completely cooled down and all the accessories are completely dry. 2 Store the parts in the original box in a cool, dry place. 3 Make sure the appliance is kept out of reach of children. Environmental note This product has been made from high-quality parts and materials which can be re-used and recycled. [. . . ]