User manual GRUNDIG PSW 5000

[. . . ] Always pull out the mains plug during an electrical storm. Do not use any cleaning agents, as this may damage the casing. Clean the device with a clean, moist leather cloth. Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic, most of which contain chemical additives. [. . . ] Please dispose of used batteries in an environmentally responsible manner. Find out about the legal regulations which apply in your area. Mains operation 1 2 Insert the cable of the mains adapter in the »DC 9 V (bottom of the device). Plug the mains adapter into the mains socket. Caution: The only way to disconnect the device from the mains supply is to unplug the mains adapter. ENGLISH Ó « socket of the loudspeaker 15 OPERATION ____________________________________________________ General information The PSW 5000 system works with a wireless audio receiver integrated in the outdoor loudspeaker, which enables the reception of the wireless audio signals from the wireless module. Loudspeaker connection cables are no longer necessary. The wireless audio transmission range is limited by national and international regulations to prevent radio interference from neighbouring devices. The wireless audio transmission power is <10 mW. This guarantees an unhindered reception range of approximately 100 m. This range is restricted inside buildings, depending on the construction materials used. Avoid placing the system near metal objects or electrical devices such as cordless telephones which use radio signals. Since the audio signals are not transmitted on an exclusive range we cannot guarantee that this will not cause interference. To avoid interference you can choose between 3 transmission channels. In some circumstances, people, walls and other surfaces can reflect radio signals. Reflected signals can mix with non-reflected signals, thus causing a type of interference known as multipath reception. This can lead to noise or a temporary loss of sound. If such interference does occur, simply position the transmitter or the loudspeaker differently. Switching on the system 1 Switch on the hi-fi system. Note: If the audio outputs of your hi-fi system have an adjustable output level, you can adjust the volume on the hi-fi system. If the audio output levels are fixed, you have to adjust the volume on the loudspeaker. 2 Set the transmission channel (1, 2 or 3) with »Channel 3 2 1 Off« on the wireless module. ­ The operating display of the wireless module (front of the device) lights up. Switch on the loudspeaker with »ON/OFF «. [. . . ] To do this pull out the mains adapter plug or remove the batteries. Restore the power supply after a short time. There is noise interference Interference caused by on the outdoor loudspeak- another device. Static electrical charge. Technical data These devices are noise-suppressed according to the applicable EU directives. These products fulfil the European directives 89/336/EEC, 73/23/EEC and 93/68/EEC. [. . . ]