User manual GRUNDIG RR 300 CD

[. . . ] Do not leave the set, batteries, CDs or cassettes for any length of time in direct sunlight or other places where high temperatures can occur, such as in the vicinity of heating apparatus. CLASS 1 LASER PRODUCT means that the laser´s construction makes it inherently safe so that the legally prescribed maximum permissible ratiation values can never be exceeded. CAUTION: Using any equipment or devices other than those described and specified in these operating instructions, or tampering with the unit in any way, can result in dangerous exposure to radiation. The lens may cloud over if the CD player is moved from cold to warm surroundings. [. . . ] ­ The total number of tracks will then appear on the display. ­ The CD player also goes to position STOP: ­ when the end of the CD is reached; ­ if you move the Function selector; ­ if the batteries run down or if the power supply is interrupted. ­ If you select CD and have not inserted a CD, `--` appears on the display. After that, the total number of tracks appears on the display. Selecting another track during play · Press R-SKIP S or F-SKIP T until the required track number appears in the display. Starting with a particular track · Press R-SKIP S or F-SKIP T until the required track number appears in the display. Hold R-SKIP S down to search backwards to the beginning. Hold F-SKIP T down to search forwards to the end. note: This function can be described as "audibly" searching for a title. During the search, volume is reduced and returns to its adjusted level as soon as the button is released. ­ The track will now be repeated continuously ­ The display shows: 'REPEAT ONE' Repeating the CD · Press REPEAT again to repeat all tracks on the CD. The CD will now be repeated continuously ­ The display shows: 'REPEAT ALL' · To switch the repeat mode off, press REPEAT one more time. The tracks are played in random order until all of them have been played once. By pressing RANDOM during playback, random play starts from the end of the playing track. The function is deactivated by pressing STOP 9 and opening the CD door (in which case the CD stops) or RANDOM; in this case the remaining tracks are played in their normal order. The random function is not possible during playback of a programme. By programming the player you can play up to 20 tracks in any desired order. If you exceed the maximum of 20 tracks, the programme function will start again from the first track. Press INTRO to play only the first 10 seconds of each title. 'INTRO' lights up on the display. After the last title, the CD player stops. The function is deactivated by pressing STOP 9 (in which case the CD stops) or INTRO; in this case the remaining tracks are played back in the normal way. [. . . ] 5 V (R20, UM-1, `D'-cells) Output power Output power . If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the guarantee. [. . . ]