User manual GRUNDIG RR 660 CD

[. . . ] Do not leave the set, batteries, CDs or cassettes for any length of time in direct sunlight or other places where high temperatures can occur, such as in the vicinity of heating apparatus. This unit complies with the safety regulations according to VDE 0860 / BS 415 and thus with the international safety regulation according to IEC 65. Changing the batteries If the range of your infrared remote control seems to decrease, or if certain individual functions can no longer be carried out, you should replace the batteries. Caution should be exercised if the set is placed on furniture as surfaces are often coated with lacquers and plastic finishes containing additives which attack the material of which the feet of the set are made, leaving stains which can only be removed with difficulty or not at all. [. . . ] CAUTION: Using any equipment or devices other than those described and specified in these operating instructions, or tampering with the unit in any way, can result in dangerous exposure to radiation. After that, the total number of tracks appears on the display. ­ The PLAY/PAUSE 6 indicator will light up and the display shows the track number. ­ The CD player also goes to position STOP: ­ when the end of the CD is reached; ­ if the batteries run down or if the power supply is interrupted. Selecting another track during play · Press R-SKIP Q or F-SKIP R several times until the required track number appears in the display. Starting with a particular track · Press R-SKIP Q or F-SKIP R until the required track number appears in the display. ­ Play starts automatically from the selected track. searching for a passage during play · Hold R-SKIP Q down to search backwards to the beginning. Hold F-SKIP R down to search forwards to the end. note: This function can be described as "audibly" searching for a title. During the search, volume is reduced and returns to its adjusted level as soon as the button is released. ­ The track will now be repeated continuously · Press REPEAT twice to stop the track being repeated. repeating the CD · Press REPEAT twice before or during playback. To switch the repeat mode off, press REPEAT again. During playback, press the MODE button on the remote control three times. ­ The tracks are played in random order until all of them have been played once. ­ The display indication toggles between the track number and a moving symbol. The function is deactivated by pressing STOP 9 (in which case the CD stops) or MODE again; in this case the remaining tracks are played in their normal order. The random function is not possible during playback of a programme. By programming the player you can play up to 21 tracks in any desired order. If you exceed the maximum of 21 tracks, the programme function will start again from the first track. Select the first desired track using R-SKIP Q or F-SKIP R. [. . . ] ­ If the CD player is in STOP position, recording will start from the beginning of the CD (or from the beginning of the programmed selection). To start a recording in the middle of a track, play the CD in the normal way. As soon as the desired passage is reached, pause the CD and then start recording by pressing 0. Press Q to search backward to the beginning of the tape. [. . . ]