User manual GRUNDIG SATELLIT 500

[. . . ]  All other uses are expressly prohibited. The ideal viewing distance is five times the d ­ iagonal screen size. 7  7  7  7  Light falling on the screen impairs picture q ­ uality. To ensure the device is always adequately ventilated, make sure there is sufficient space between the television set and nearby furniture. Thunderstorms are a danger to all electrical devices. Even when the television is switched off, it can be damaged by a lightning strike to the mains or the antenna. [. . . ] TV can also operate with DMS software that can be installed on a computer but, it is not guaranteed that it will run in full compatibility with software without a DMS certificate. . Press BLUE key to search DMS device 7  7 3 Press »▯▯▯▯« (blue) to discover DMS devices on home network. –  MS devices that are discovered appears D in the menu. 7  Note: If no DMS device appears, check the network connection. See page 32 or 35. 7 Perform the following steps for a sample DMS set up. Open Windows Media Player11’i on a computer with Windows operating system. In »Library« tab, select »Media Sharing«, tick on the »Share my media« box on the window that appears and then select »OK«. The new window displays the IP numbers of connected devices. To enable the TV to detect the computer, you need to select the television‘s IP number. If IP is not listed in the window; from »Media Sharing« menu‘s »Settings« option, you can select the option »Allow new devices and computers automatically« in the pop-up menu. After completing these processes, the television can only view the supported file formats in the Library. In order not to encounter any problems with media sharing, check the firewall settings of your modem and computer. 4 You can select the DMS device you want with »V«, »Λ«, »<« or »>« and see its content with »OK«. T Notes: 7 File and folder structure of the DMS device  in menu may vary depending on the Digital Media Server software in use. 7  Subtitles are not supported on video files that are played through the DMS device. USB Media Player may not support some recorded files. USB Multimedia Player might not support some recorded events. For proper playback please use the PRnP player. LIST« opens the menu »RECORDED FILES«, then select and playback the event. you record and save a programme on the archive of an external data medium, playback can be restricted. The broadcaster can allow you to view this programme one or more times, but it may onlyv be available for a certain period of time. not suitable for minors will require the input of a PIN number immediately before recording starts. If this authorisation is not given, the recording may not start. ■  rogrammes P ■  eception R ■  rundig G ■ t I ■  opying C a programme from a digital television channel onto a video or DVD recorder using the »AV 1« socket (analogue picture/ sound signal) can also be restricted by the broadcaster. Prerequisite is that your device supports the copying function. ■  he T 5 ENGLISH ­ 1 uSB­rECorDING­-------------------------------------------------------------------------------------------------------------Connecting­external­data­media­ Notes: 7 Before connecting the external data medium it is recommended to switch the television to stand-by mode. 7 7 Before removing the external data medium, the television must be switched to standby, so that no data loss occurs. Notes: The »uSB1« socket of the television supplies a maximum power of 500 mA in accordance with USB specifications. External hard disks which require more power may therefore only be connected to the »uSB2­ (HDD)« of the television. If you use a network cable for external hard disks which have been connected to the »uSB2­(HDD)« socket of the television, this network cable must also be disconnected from the power supply when the television is switched off. External data media may not be disconnected from the television while files on the data medium are being accessed. 7 Your television features two USB sockets, »uSB1« and »uSB2­(HDD)«. »uSB2­ HDD)« s sed o onnect data edia, ( iu t c m which require an additional power supply – for example, external hard disks. 7 1 Connect the »uSB2­ (HDD)« socket of the 7 Settings­for­uSB­recording Selecting­the­menu 1 Open the menu with »mENu«. [. . . ] For public use, a general authorisation is required. For customers in Norway This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund. For customers in Russian 1. SRD with FHSS modulation 7 Maximum 2. 5 mW e. i. r. p. Permitted for use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposes for outdoor applications only when the installation height is not exceeding 10 m above the ground surface. [. . . ]