User manual GRUNDIG SELIO

[. . . ] Dépliant LU 253106070A Selio EN_UK. fm Page 1 Lundi, 28. Introduction Dear customer: Thank you for purchasing a DECT Grundig telephone we appreciate your trust in us. This product was manufactured with the utmost care, should you encounter difficulties during its use. We recommend that you refer to this user guide. [. . . ] When the alarm clock is set of, the selected ring tone rings for 60 seconds through the handset loudspeaker and a warning screen is displayed. To stop the warning, press any key on the handset. Press , select " clock / alarm " using the or key, Press . key, select "handset tone" Press key, select "ring melody" Press key, select "base tones" Press Five tones are available : " melody 1 ", . . . , " melody 5". 4. Using the or key, select "ring volume" Press . Five levels are available: "volume 1 ", . . . , "volume 5". To deactivate the phone ringing on receiving calls, choose "volume off". Select the desired volume level then press the key You will hear a confirmation tone. 6. Press and hold key for 5 seconds (after 1 minute if no Handset has started association process the base goes back to standby). Once the handset is registered, you will hear a confirmation tone. The handset automatically exits the registering mode. When the handset has been successfully registered with the base station, a list of numbers is displayed on your handset screen. If you do not select a registration number for your handset at this level, this number will be automatically assigned by the base station. The handset automatically exits the registering mode and the handset number is displayed on the screen saver 8. 1. 3. Key tone On/Off . Using the or key, select "alarm". Press To activate the alarm once, select "alarm once ". To repeat the alarm each day at the programmed time, select "alarm daily ". To deactivate the alarm, select "alarm off ". : Select your choice then press Use the touch tone pad to enter the current alarm time. You will hear a confirmation tone. This function allows you to activate or deactivate tones being heard when pressing the keypad. Press Using the Using the Use Press or , select " settings " using the or or or key, Press . Change the base station ringing tone 1. Press Using the , select " settings " using the or or key, Press . [. . . ] The product The crossed-out waste bin stuck on the product or its accessories means that the product belongs to the family of electrical and electronic equipments. In this respect, the European regulations ask you to dispose of it selectively: At sales points in the event of the purchase of similar equipment. At the collection points made available to you locally (drop-off centre, selective collection, etc. ). In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health. Solution Check installation: - Is the base power cord connected to a working outlet? [. . . ]