Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GRUNDIG WT 2. We hope that this GRUNDIG WT 2 user guide will be useful to you.
Lastmanuals help download the user guide GRUNDIG WT 2.
Detailed instructions for use are in the User's Guide.
[. . . ] WIRELESS TRANSMITTER
WT2
DEUTSCH ENGLISH FRANÇAIS ITALIANO PORTUGUÊS
ENGLISH
WIRELESS TRANSMITTER WT2 __________
Package contents
1 2 3 4 5 6 7 8 9 10 11 WT2 WT2 installation kit (for attaching to television) Mains cable for indoor TV installation (e. g. Lenaro) Mains cable for external sockets (e. g. Vision Company) Antenna module for indoor TV installation (e. g. Lenaro) Antenna module for outdoor TV installation (e. g. [. . . ] 2 Select the line »Install front« with »P+« or »P-«, activate with »OK« and set to »Yes«; then confirm with »OK« (if you do not intend to install front loudspeakers, press »P+« or »P-« to select »No«). 3 Select the line »Install Surround« with »P+« or »P-«, activate with »OK« and set to »Yes«; then confirm with »OK« (if you do not intend to install surround loudspeakers, press »P+« or »P-« to select »No«). 4 Select the line »Start installation« with »P+« or »P-« and confirm with »OK«. The status menu »Start installation« appears on the television screen. It shows information on the current installation status. The automatic installation procedure starts.
41
ENGLISH
INSTALLATION (I2C) _____________________________________
5 Turn on the left front loudspeaker with the mains switch. The loudspeaker indicator flashes orange, after completion of the installation it flashes green. Note: If the loudspeaker indicator continuously illuminates orange when switched on, it has already been installed at FineArts Audion. In this case, briefly press »RESET« to set the loudspeaker to installation mode. »RESET« should not be pressed for longer than 5 seconds, as this will delete all installation data. 6 Turn on the right front loudspeaker with the mains switch. The loudspeaker indicator initially flashes orange, after completion of installation it flashes green. 7 Turn on the left rear loudspeaker with the mains switch. The loudspeaker indicator initially flashes orange, after completion of installation it flashes green. 8 Turn on the right rear loudspeaker with the mains switch. The loudspeaker indicator initially flashes orange, after completion of installation all four loudspeaker indicators continually illuminate green. The message »Installation completed« appears on the television screen. 9 Press »i« to quit the menu. Sound is not transmitted until the system configuration has been set. Note: The installation can be prematurely interrupted by pressing »OK« on the remote control (»Installation abortted« appears). In this case, the loudspeaker installations successfully completed up until the interruption remain saved.
Registering WT2 with the HiFi system FineArts Audion
When you simultaneously operate WT2 with the HiFi system FineArts Audion, you must register the wireless module with the HiFi system. This procedure is described in the installation instructions from FineArts Audion.
42
INSTALLATION (I2C) _____________________________________
System configuration, e. g. [. . . ] FAV and FAP only: switch off the loudspeakers. Disconnect the power cord from the WT2 and plug it in again after a short time. I2C only: using the power switch, switch off the television and switch it on again shortly afterwards.
The »ERROR« LED flashes on the WT2.
51
ENGLISH
INFORMATION
___________________________________________
Additional information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply. The range of multi-system receivers is built to work in most European countries. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GRUNDIG WT 2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GRUNDIG WT 2 will begin.
