User manual GRUNDIG XERIA GV 5153 HIFI

[. . . ] VIDEORECORDER XERIA GV 5153 HiFi DEUTSCH ENGLISH CONTENTS ________________________________________________________ 4 GV 5153 HiFi video recorder Packing contents Special features of your video recorder 5 6 Set-up and safety Overview The front of the video recorder The back of the video recorder The remote control 10 Connection and preparation Insert batteries in the remote control Connect the aerial and television Connect aerial, television and GRUNDIG VCR-SAT module Connect the aerial, television and GRUNDIG satellite receiver Switch the video recorder on and off (energy-saving mode) 16 Tuning Tuning the video recorder and the television Automatic channel tuning (using ATS euro plus) 20 Playback Basic playback functions Additional playback functions Continuous playback 25 Search functions Zero setting Finding recordings using the Video Index Search System (VISS) 26 Recording Four recording options The Video Programming System (VPS/PDC) Immediate recording Delayed recording by entering the ShowView number Delayed recording by entering the data for the required television program Checking, modifying or deleting recording information Interrupting recording stand-by mode Reactivating recording stand-by mode 36 Copying Connection and preparation Recording from external devices 2 CONTENTS _____________________________________________________________ 38 Satellite receiver Operation with a satellite receiver without a SAT control socket Recording television programs from the satellite receiver Recording ­ controlled by a satellite receiver 41 Using a decoder Decoder operation with television stations from the antenna or the cable system Recording PAY TV programs 45 Audio playback HiFi audio playback Audio dubbing 47 Special settings Sorting, deleting and renaming television stations Re-tuning television channels Skipping television stations Setting new television stations from the antenna or the cable system Tuning new television stations Switching the station on the video recorder on and off Setting new television stations from the VCR-SAT module 54 Setting the date and time Automatically updating the time and date Setting the time and date manually 55 Special features Selecting special features in the »MODE« menu Selecting special features in the »SERVICE« menu 58 59 60 Parental lock Television remote control Information Rectifying minor problems Technical data GRUNDIG Service ENGLISH 3 GV 5153 HIFI VIDEORECORDER __________ Packing contents 2 3 4 1 SP/LP Dub 1 Video recorder GV 5153 HiFi 2 EURO-AV cable 3 Antenna cable VIDEORECORDER Digital FX OSD 4 Remote control 5 Operating manual 6 2 batteries, 1. 5 V, mignon type Clear Timer/SV Timer on 5 6 Index Audio Monitor TV P Tele Pilot 92 V Special features of your video recorder Four recording options ­ Immediate recording, in which you select the required channel on the video recorder and start recording immediately. ­ Delayed recording using the ShowView number. ­ Delayed recording by entering the time and channel of the programme you want to record (if you do not know the ShowView number). ­ Delayed recording by entering the data in the TIMER menu of a Grundig television with the Megalogic function. ShowView* recording This function makes recording child's play. [. . . ] Note: If you are recording the audio/video signal from an external device rather than one of the television stations select » AV 1«, » AV 2 «, or » CV« as the channel by pressing »+« or » ­ «. Recording from a satellite receiver: If a television station from an installed satellite receiver without a SAT control line is programmed, select the channel position »AV 2« with » + « or » ­ «. The satellite receiver must be switched on at the selected recording time and for the duration of the TIMER recording. (This is not necessary for the Grundig VCR-SAT module or for many Grundig satellite recievers with a SAT control line. ) <> :SELECT :DATA :CHANGE INFO :EXIT DATE 01 / 02 --/----/----/----/----/--- PR 02 ------ START 19: ---:---:---:---:---:-0-9 STOP --:---:---:---:---:---:-- S ------ * <> :SELECT :DATA :CHANGE INFO :EXIT 7 Enter the time to start recording (START) as four digits with » 0 . . . 9 «. 8 Enter the time when the recording finishes (STOP) as four digits with » 0 . . . 9 «. DATE PR START STOP 01/02- 02 19:30 20:15 --/--- -- --:-- --:---/--- -- --:-- --:---/--- -- --:-- --:---/--- -- --:-- --:---/--- -- --:-- --:-SP/LP/A: TAPE SPEED S ------ * 9 Set the tape speed using »+« or » ­ « if necessary: »S« is standard play mode; »L « is long play mode; »A« is automatic mode. ­ In automatic mode the video recorder compares the remaining playing time with the length set for the recording and automatically selects long play mode if necessary. Note: Automatic mode is not available for TIMER recordings with VPS/PDC. <> :SELECT :CHANGE INFO :EXIT 32 RECORDING __________________________________________________________ 10Switch off VPS/PDC (if it is not required) by pressing »« to select » « and then »+« or » ­ « to switch off VPS. ­ » « in the display denotes VPS recording. * * DATE 01/02--/----/----/----/----/--- PR 02 ------ START 19:30 --:---:---:---:---:-- STOP 20:15 --:---:---:---:---:-- 11Save the recording data by pressing » OK «. S S ----- * * ­ The »TIMER« menu is displayed on the screen. 12 For further recordings, repeat the procedure from step 3, or terminate the function by pressing »i«. :SELECT OK :ENTER 13 Press » Timer on« to switch the VCR to recording stand-by. INFO :EXIT ­ The video recorder display now shows the time and the TIMER symbol » «. The video recorder is now in recording stand-by mode. Checking, modifying or deleting recording information Preparation Switch on the television. Select the channel position »AV« on the television for the video recorder. Calling up the TIMER menu MENU ITIMER MODE INSTALL SERVICE 1 If the video recorder is in recording stand-by mode, press and hold down » Timer on«. 2 Press » 1 . . . 0« to switch on the video recorder. 3 Press »i« to open the main menu. :SELECT OK :ENTER INFO :EXIT Note: Select the function you require in the »TIMER« menu. For information on using these functions see the following sections, each time starting from Step 1. 33 ENGLISH RECORDING __________________________________________________________ Checking recording data DATE 01/02--/----/----/----/----/--PR 02 -----START 19:30 --:---:---:---:---:-STOP 20:15 --:---:---:---:---:-- 1 Highlight the » TIMER« line by pressing » OK «. S S ----- * * ­ The »TIMER« menu appears and you can check the recording data. 2 Press »i« to quit the »TIMER« menu. 3 Press » Timer on« to switch the VCR to recording stand-by. :SELECT OK :ENTER INFO :EXIT ­ The video recorder display now shows the time and the TIMER symbol » «. The VCR is in recording stand-by mode. Modifying recording data 1 Highlight the » TIMER« line by pressing » OK «. ­ The » TIMER« menu appears. 2 Press »+« or » ­ « to select the required item in the TIMER DATE 01 / 02 --/----/----/----/----/--PR 02 -----START 19:45 --:---:---:---:---:-0-9 STOP 20:15 --:---:---:---:---:-- S ------ * menu and then » OK « to highlight it. ­ The selected TIMER position is moved to the last line of the menu. 3 Select the required recording data using »®« or »« and edit it using »+«, » ­ « or » 1 . . . 0«. <> :SELECT OK :ENTER :DATA :CHANGE INFO :EXIT 4 Press » OK « to save the recording data. 5 Press »i« to quit the »TIMER« menu. 6 Press » Timer on« to switch the VCR to recording stand-by. ­ The video recorder display now shows the time and the TIMER symbol » «. The VCR is in recording stand-by mode. 34 RECORDING __________________________________________________________ Deleting recording data DATE 01/02 01/02 --/----/----/----/--PR 02 04 ----START 19:30 21:00 --:---:---:---:-STOP 20:15 22:00 --:---:---:---:-- 1 Highlight the » TIMER« line by pressing » OK «. S S S ---- * * * ­ The » TIMER« menu appears. 2 Select the TIMER item in question with »+« or » ­ « and press »Clear« to delete it. :SELECT OK :ENTER 3 Press »i« to quit the »TIMER« menu. INFO :EXIT 4 If several TIMER items have been programmed, press » Timer on« to switch the VCR to recording stand-by. ­ The video recorder display now shows the time and the TIMER symbol » «. [. . . ] The video recorder and television have not been tuned to each other. The tracking position is badly adjusted. Tune the video recorder and the television (see Page 16). During playback, adjust the picture with » +« or »­« to obtain the best possible image. [. . . ]