User manual GRUNDIG YACHT BOY 2000

[. . . ] WORLD RECEIVER Yacht Boy 2000 CARE AND SAFETY ________________________________________________ ENGLISH This device is designed for the playback of audio signals. Prolonged use of the earphones can damage your hearing. Make sure the device is protected from dripping or splashing water. Do not place any vessels such as vases on the device. [. . . ] 1 Keep pressing »MODE« until »HOME« appears in the display. ­ Display: the hours and minutes flash. 3 Press »H A« repeatedly to set the hours step-by-step or hold down to run through quickly. 38 SETTINGS _____________________________________________________________ 4 Press »M S« repeatedly to set the minutes step-by-step or hold down to run through quickly. 5 To store the setting, press »MEMO TIME SET«. Switching between your local time and dual time 1 Keep pressing »MODE« until the dual time appears in the display and » DUAL « flashes. ­ Display: dual time and » DUAL « continuously. 3 Keep pressing »MODE« until your own local time appears in the display and »HOME« flashes. ­ Display: your own local time and »HOME« continuously. Setting the dual time If you are on a trip, for example in Hong Kong, you can set the local time there without having to change your local time at home. ENGLISH 1 Switch the device to dual time. 39 SETTINGS _____________________________________________________________ 2 Press »MEMO TIME SET«. ­ Display: the hours and minutes flash. 3 Press »H A« repeatedly to set the hours step-by-step or hold down to run through quickly. 4 Press »M S« repeatedly to set the minutes step-by-step or hold down to run through quickly. 5 To store the setting, press »MEMO TIME SET«. Setting the alarm time 1 Keep pressing »MODE« until »ALARM« appears in the display. ­ Display: the hours and minutes flash. 3 Press »H A« repeatedly to set the hours step-by-step or hold down to run through quickly. 4 Press »M S« repeatedly to set the minutes step-by-step or hold down to run through quickly. 5 To store the setting, press »MEMO TIME SET«. 40 SETTINGS _____________________________________________________________ Tuning to radio stations There are three ways to tune into stations: automatically ­ with the station search, manually ­ with a step-by-step search through the frequencies, directly - by entering the frequency number. 1 Press »POWER« to switch on the device. 2 Press »FM MW SW1 SW2« to set the waveband. Note: If you have set short wave, select the band you want (see the table on page 26). Press »METER« repeatedly. Automatically 1 Keep pressing »H A« or »M S« until the frequency switches to rapid run-through. ­ The search stops when a station with good reception is found. 41 ENGLISH SETTINGS _____________________________________________________________ Manually 1 Keep pressing »H A« or »M S« until the frequency switches to rapid run-through. 2 When you have nearly reached the frequency you want, briefly press the opposite key (»M S« or »H A«). 3 Press »H A« or »M S« briefly several times to set the frequency step-by-step. Directly 1 Press »FREQ« briefly. [. . . ] 2 To unlock the keys, push back »a LOCK«. ­ Display: »LOCK« disappears. Display lighting 1 Select the display lighting by pressing »LIGHT« for about twelve seconds. 2 To switch off the display lighting, press »LIGHT«. Resetting the device 1 Press »RESET« (e. g. with a paper clip) to restore the device to its original setting. [. . . ]