User manual GRUNDIG YACHT BOY 400

[. . . ] WORLD RECEIVER YACHT BOY 400 YACHT BOY 400 TIME I SLEEP ON/OFF MHz 60 FM TUNING . . 5 . . . 3. . . 4. 0. . . 1. . . 2 89. 6 FREE SLEEP ON TIME TIME 1/2 STORE AUTO TUNING FM 1 2 3 MEMO AM 4 7 5 8 6 9 RESET 0 FREQU. /METER LOCK AUTO TUNING ST E P 40 STATION ES MEMORI SSB LW / M W / S W /FM STEREO SIZED PLL SYNTHE RSION DUAL CONVE Contents Contents Your Unit at a Glance Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 Front of Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Top of Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] AM The AM bands are selected with the ¢ AM button. The first pressure on the ¢ AM button switches to the station last received on one of the AM bands. Each further pressure on the bands in the order LW MW SW LW ¢ AM button steps through the AM etc. MW and you will hear the station last tuned to in the selected band. 14 Station Tuning Switch the unit on with the ¢ ON/OFF button. The display indicates the frequency tuned to ­ on FM in MHz, and on AM in kHz. The automatic search will stop as soon as it has found a station worthy of reception (of a signal strength sufficient for good reception). It then can be restarted with the ¢ AUTO TUNING button (brief or long pressure). TIME I Frequency Tuning in the FM Band Select the FM band. You hear the station last tuned to in the FM band. Manual tuning Tune to the desired station by briefly pressing one of the buttons TUNING or TUNING . Each button pressure will change the frequency by 50 kHz. If the TUNING or TUNING button is kept pressed, the frequency range will be sanned in 50 kHz steps at high speed until the respective button is released. I 8:0 0 BATT. CHECK TUNING 0. . . 1. . . 2. . . 3. . . 4. . . 5 FM LW MW SW : 8. 9. 8. 6. 0 kHz MHz 0 Frequency Tuning in the AM Bands Select the AM range. You will hear the station last tuned to in the respective AM band. Selecting an AM band Press the ¢ AM button repeatedly until the desired AM band is selected. Each pressure on the button steps through the AM band in the order LW MW SW LW MW etc. 0 Automatic tuning (AUTO TUNING) This frequency search is started by pressing the ¢ AUTO TUNING button. Short presssure: Search is started in direction of higher frequencies. Long pressure: Search is started in direction of lower frequencies. The search function operates with 50 kHz steps. 15 Station Tuning Adjusting the tuning steps The tuning steps are adjusted with the ¢ STEP button. With the unit switched on, you can switch between: 1 kHz or 9 kHz on LW 1 kHz or 5 kHz on SW 1 kHz or 9 resp. The respective waveband must be selected. Repeatedly press the ¢ STEP button until the desired tuning step value (e. g. , in the figure, STEP 9KHZ) is indicated in the display. TIME I This is a precaution to avoid accidental tuning step switching. ON-TIME TIME I 8 6:3 0 FM LW MW SW 8. 8. 8. I. 0 00 kHz MHz When activating the automatic tuning mode, the unit automatically switches to the higher tuning step. However, the 9 kHz or 10 kHz choice in the MW band is retained. Manual tuning ­ Tune to the desired station by briefly pressing on the TUNING or TUNING button. [. . . ] The TUNING indication deflects in the rythm of the speech. 26 Specification Power Supply By six 1. 5 V batteries (IEC LR 6). External supply: By a commercial 9 V DC mains unit (see connecting socket). Output Power 600 mW (via built-in loudspeaker). Built-in Aerials Telescopic aerial for FM and SW. [. . . ]