User manual GTO PRO 10 WATT SOLAR PANEL

[. . . ] It should receive at least 8 hours of direct sunlight for a full charge. HINT: If the solar panel must be placed more than 10 ft. from the control box (but less than 250 feet away), use multi-stranded, 16 gauge (AWG), direct burial, low-voltage wire (see Accessory Catalog). Never use telephone wire or solid core wire. [. . . ] *An operational cycle is one full opening and closing of the gate. Estimated Gate Openings Per Day Winter Ratings Single gate installation with 10 Watts of charging power Single gate installation with 20 Watts of charging power Single gate installation with 30 Watts of charging power Dual gate installation with 10 Watts of charging power Dual gate installation with 20 Watts of charging power Dual gate installation with 30 Watts of charging power Zone 1 Zone 2 Zone 3 8 14 20 4 10 16 16 28 44 8 18 28 26 38 54 13 27 41 All dual gate installations require a minimum of 10 Watts of solar charging power. Accessories will draw additional power from the battery; the more accessories you connect, the more power your system will require. Zone 1 Zone 3 Zone 2 Zone 3 Zone 3 Multiple Panel Installations NOTE: All connections should be weather proofed using weather proof splice kits avilable at hardware and electrical supply stores. Solar Panels connect in PARALLEL RED BLACK RED BLACK attach BLACK to negative (­) solar terminal on control board attach RED to positive (+) solar terminal on control board Other GTO/PRO Access Controls and Accessories Push Button (doorbell) Control (RB101) Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16 gauge (AWG), multi-stranded, dual conductor low voltage wire (sold separately). Pin Lock (FM134) The Pin Lock substitutes for the clevis pin at the front end of the GTO/PRO® gate openers. Helps prevent theft of the opener from the gate, while allowing quick release of the opener. Key Chain Mini Transmitter (RB744) The Key Chain Mini Transmitter is a miniature version of the GTO/PRO® entry transmitter and has the same adjustable code settings. Entry Transmitter (FM135) The GTO/PRO® entry transmitter, with adjustable code settings, is standard equipment with all GTO/PRO® systems. Digital Keypad (FM137) The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be programmed to use up to 25 different personal identification number (PIN) codes. Each code is face programmable with additional security features built in. Wired installations require 16 gauge (AWG), low voltage, multi-stranded, dual conductor, direct burial wire (sold separately). GTO/PRO 50' Exit Wand (FM139), 100' Exit Wand (FM140), 150' Exit Wand (FM141) The GTO/PRO® Exit Wand is designed for residential and agricultural applications and is compatible with all GTO/PRO® automatic gate operator models. The wand is an electromagnetic sensor, which offers `hands free' operation of the GTO/PRO® Gate Operators with a 12 ft. radius of detection of vehicles in motion. Automatic Gate Lock Pull-to-Open (FM144) A MUST for added security. Unlocks and locks automatically as gates open and close. Used with the Mighty Mule® system for maximum stability and security. Ideal for animal enclosures or high wind areas. Low Voltage Wire (RB509) The 16 gauge (AWG), multi-stranded, dual conductor Low Voltage Wire is for connecting the AC powered transformer, or the Solar Panel to the control board. Also used for connecting accessories, such as locks, keypads, push buttons and other wired control devices. [. . . ] 9 Volt battery included. HED UNIV DOL REC ERS MODEL EIVER AL F 294 If you have a question about any special order item, just call 1-800-543-GATE! 3121 Hartsfield Road · Tallahassee, Florida, USA 32303 Telephone GTO/PRO Sales: 1-800-543-GATE (4283) or (850) 575-0176 · Fax (850) 575-8912 or GTO Technical Service: 1-800-543-1236 or (850) 575-4144 · Fax (850)575-8950 www. gtopro. com The contents of all material available on this installation manual are copyrighted by GTO, Inc. ("GTO"), unless otherwise indicated. All rights are reserved by GTO, and content may not be reproduced, downloaded, disseminated, published, or transferred in any form or by any means, except with the prior, written permission of GTO. Any reprinting of GTO publications is by permission only. [. . . ]