User manual GTO PRO F3100 INTERCOMKEYPAD

[. . . ] IMPORTANT: Allow the intercom base unit's battery to charge for 12 hours before using the system for the first time. See page 6 for details. Wireless Gate Entry Intercom/Keypad Instructions for Wireless and Wired Installations Crystal clear two-way communication up to 500 feet wireless or 1000 feet wired. Thank you for purchasing the GTO Wireless Gate Entry Intercom/Keypad. Be sure to read the directions carefully and completely. [. . . ] · Enter 0, 6 then press and release PROGRAM button · Enter the new Master Code then press and release PROGRAM button. · Enter the new Master Code then press and release PROGRAM button again for confirmation. · Beeper beeps 3 times to confirm that the new Master Code is accepted. NOTE: If the Master Code is not a matched pair or error occurs, (i. e. if the entry code is NOT a 4-digit code) the STATUS light will flash rapidly and the beeper will sound for 2 seconds before returning to normal operation with old Master Code. Example: Key press sequence to change old Master Code from 1 2 3 4 to 3 1 2 1 The round black dot is the `PROGRAM' button. 1234 82 3456 1234 87 3456 The round black dot is the `PROGRAM' button. 1234 06 3121 3121 Delete An Entry Code: · Press and release PROGRAM button. · Enter the Master Code then press and release PROGRAM button. · Enter 0, 3 then press and release PROGRAM button. · Enter the Entry Code to be deleted then press and release PROGRAM button. · Beeper beeps 3 times to confirm that the new Entry Code is deleted. NOTE: If no matching code is found or the code is NOT 4-digit in length, then an error condition has occurred. The STATUS light will flash rapidly and the beeper will sound for 2 seconds before returning to normal operation without saving. Example: Key press sequence to delete entry code `3456' from memory. (1234 is the Master Code) Program (Add) New Entry Code: · Press and release PROGRAM button. · Enter the Master Code then press and release PROGRAM button. · Enter 0, 2 then press and release PROGRAM button. NOTE: If memory is full (all 25 locations are already programmed) the STATUS light will flash rapidly and the beeper will sound for 2 seconds before returning to normal operation without saving. · Enter the new Entry Code then press and release PROGRAM button. · Beeper beeps 3 times to confirm that the new Entry Code is accepted. NOTE: If the code is NOT 4-digits in length or an error condition has occurred. The STATUS light will flash rapidly and the beeper will sound for 2 seconds before returning to normal operation without saving. Example: Key press sequence to add `3456' as a new entry code. [. . . ] gate opener accessories are warranted by the manufacturer against defects in workmanship for a period of one (1) year from the date of purchase, provided recommended installation procedures have been followed. In the case of product failure due to defective material or manufacturer workmanship within the one (1) year warranty period, the accessory will be repaired or replaced (at the manufacturer's option) at no charge to the customer, if returned freight prepaid to GTO, Inc. , 3121 Hartsfield Rd. , Tallahassee, FL 32303. IMPORTANT: Call 850/5754144 or fax 850/575-8950 for a Return Goods Authorization (RGA) number before returning goods to factory. Products received at the factory without an RGA will not be accepted. [. . . ]