User manual H&B BL-600

[. . . ] Connect the female ISO connectors on the cable provided with your BL600 kit to the connectors on your vehicle's ISO loom. Next connect the male ISO connectors provided with your BL-600 kit to the ISO connectors on the radio. INSTALLING THE MODULE Fitting the BluetoothTM module Find a location far from the heating/air conditioning system or any source of heat. Make sure this location does not prevent the BluetoothTM radio signal from being transmitted to the passenger compartment. Make sure also that the distance between the loom and the module is not so great as to prevent it being connected. [. . . ] Connect/disconnect a BluetoothTM link with the terminal. Scroll menu options Make a call using voice dialling. Transfer a call from the phone to the BL-600 ASSOCIATION/CONNECTION WITH MOBILE PHONES Follow the instructions in the manual for your mobile phone to pair a BluetoothTM device in hands-free mode. Find/add "CAR 08" devices, enter connection code "1234" then confirm the connection. The BL-600 can be connected/associated with 4 different mobile phones. If a 5th phone is associated, the BL-600 will erase the connection with the last device paired. By default the pairing is set to the last device recorded / connected. DISCONNECTION/CONNECTION To dissociate (unpair) a phone from the BL-600, press (L) once, or; deactivate BluetoothTM mode from the phone menu, or; move the phone more than 10m from the vehicle. NOTE: once disconnected, the BL-600 keeps its parameters in memory for use in a subsequent reconnection. To reconnect the phone to the BL-600, press (L) or reactivate the BluetoothTM function your phone. C ANSWER / REJECT A CALL / FINISH A CALL When an incoming call is received, the sound from the radio is cut automatically and a ringing tone may be heard coming from the vehicle's loudspeakers. on the BL-600 or the answer button on CALL TRANSFER To activate call transfer between the BL-600 and your phone: - Press (C) to transfer a call from the phone to the BL-600. - Press (C) to transfer a call from the BL-600 to the phone. AUTOMATIC ANSWERING If your phone is in "Automatic Answer" mode, it will automatically answer incoming calls after the ringing tone and your conversation will be automatically transferred to your BL-600. CALLBACK LAST 10 NUMBERS Press and hold for more than two seconds to display the number callback options. Press + or - to change the selection (Received calls/Missed calls) and press to confirm the number to call back. If you do not want to take this call, press the hang-up button on your phone. briefly on the BL-600 or VOLUME +/- KEYS Press the (+) and (-) keys to increase or reduce the volume respectively. MICROPHONE DISCONNECT You can disconnect the microphone during a call. To do this, press - the display shows "MUTE ON". Press again and the microphone is once more operational with the display showing "MUTE OFF. DOUBLE CALL FUNCTION While on one call, you receive a second: If you do not want to take the second call, do nothing, To take the second call, press hold. To go back to the first caller, press and your first caller will be put on once more. . SPECIAL FUNCTIONS: Voice dialing To activate voice dialling, press (C) for more than two seconds. The phone then repeats the name of the caller you are looking for and dials the default number. [. . . ] The warranty does not cover the following operations: a) Periodic inspection and maintenance and repair and replacement of parts as a result of normal wear and tear. b) Expenses relating to the transport, dismantling or installation of the product. c) Incorrect usage, including for purposes other than those for which the equipment was originally intended or for incorrect installation. d) Damage due to thunder, water, fire, natural disasters, wars, insurrections, incorrect mains voltages, insufficient ventilation and other causes outside the control of H&B. [. . . ]