User manual H&B HF-275

[. . . ] MODEL HF-275 OPERATING INSTRUCTIONS The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WA R N I N G : To r e d u c e the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS. CAUTION DO NOT EXPOSE TO DRIPPING OR SPLASHING LIQUIDS! BACKLIGHT DISPLAY BLUE TIMER AUTO ON/OFF CLOCK QUARTZ DIGITAL PLL DIGITAL TUNER MP3 DIGITAL PLAYBACK REMOTE CONTROL CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS SHOULD BE TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT IN RECEPTACLE "WALL SOCKET". CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. VORSICHT: UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST. [. . . ] - PRESS THE TUNER BUTTON TO SELECT THE DESIRED RADIO BAND. - FOR MW (AM) STATIONS, ROTATE OR REPOSITION THE SET TO IMPROVE RADIO RECEPTION. - FOR FM STATIONS, EXTEND AND ADJUST THE TELESCOPIC ANTENNA TO OBTAIN THE BEST RECEPTION. - USE THE FM MONO/STEREO BUTTON TO SELECT THE DESIRED MODE. IN SOME CASES, WHERE RECEPTION IS POOR, IT MAY BE ADVISABLE TO SELECT "MONO" MODE, TO IMPROVE CLARITY OF THE RADIO SIGNAL. MANUAL FREQUENCY ADJUSTMENT (SCAN MODE) NEXT BUTTON OR BACK - PRESS (AND IMMEDIATELY RELEASE) THE BUTTON TO "SCAN" (MANUALLY ADJUST) THE RADIO FREQUENCY "UP" OR "DOWN" BY 1-STEP AT A TIME. - THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY AT EACH STEP'S POSITION. - WHEN A DESIRED FREQUENCY OR STATION IS REACHED. IT CAN BE SAVED INTO ONE OF THE "MEMORY" POSITIONS. (SEE "RADIO MEMORY" SECTION). NORMAL CD OPERATION - PRESS POWER BUTTON TO SWITCH ON THE UNIT. THE DISK WILL START SPINNING & THE FIRST SONG (TRACK) WILL START PLAYING. THE DISPLAY WILL INDICATE THE CURRENT TRACK NO. - AT ANY ANYTIME DURING PLAYBACK, PRESS THE PLAY BUTTON TO PAUSE OPERATION OF THE UNIT. PRESS PLAY BUTTON TO RESUME OPERATION AT THE SAME TRACK & POSITION. - AT ANYTIME DURING PLAYBACK, PRESS THE STOP BUTTON TO STOP OPERATION OF THE SET. THIS WILL RESET THE SET TO THE FIRST TRACK (IF YOU PRESS PLAY AFTER STOP, THE FIRST TRACK WILL ALWAYS START PLAYING). NEXT OR BACK - AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE THE BUTTONS TO SKIP FORWARD OR BACKWARDS BY ONE TRACK, AS DESIRED. NEXT OR BACK - ANY ANYTIME DURING PLAYBACK, PRESS AND HOLD THE BUTTONS TO FAST-FORWARD (CUE) OR FAST-REVERSE (REVIEW) THE SPECIFIC TRACK, WHICH IS CURRENTLY PLAYING. AUTOMATIC FREQUENCY ADJUSTMENT (SEEK MODE) NEXT OR BACK BUTTONS - PRESS AND HOLD (FOR 2 SECONDS) THE TO "SEEK" (AUTOMATICALLY ADJUST) THE RADIO FREQUENCY "UP" OR "DOWN" TO THE NEXT AVAILABLE RADIO STATION. - THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY OF THE NEXT STATION THAT IS FOUND. IT CAN BE SAVED INTO ONE OF THE "MEMORY" POSITIONS. - MP3 SONGS ARE MUCH SMALLER IS MEMORY SIZE COMPARED WITH NORMAL CD-AUDIO FORMAT SONGS. THIS IS CALLED "COMPRESSION" & IT ALLOWS MUCH MORE RECORDING TIME ON A STANDARD CD THAN THE NORMAL 74 MINUTES (FOR NORMAL CD-AUDIO). - THE EXACT LENGTH OF RECORDING TIME DEPENDS ON THE "COMPRESSION RATE" OF THE MP3 SONG YOU HAVE DOWNLOADED. [. . . ] - TO EXIT THE "FIND" MODE PRESS THE FIND BUTTON ONCE UNTIL THE "FIND" SYMBOL DISAPPEARS FROM THE DISPLAY. THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE APPARATUS. E-15 E-16 Warranty certificate H&B provides a twelve (12) month warranty from the date of purchase against material and manufacturing defects. In the event of defects covered by the warranty, the product must be returned to the dealer that sold the product. If any problems arise, information on our authorized service centers is available the dealer who sold the product. The warranty is only valid on presentation of a correctly completed warranty certificate and sales ticket, and if the serial number on the product is fully legible. [. . . ]