User manual HAICOM HI-601VT

[. . . ] The GPS receiver module in HI-601VT start receive GPS satellite signal (The GPS LED blinking means the GPS is in 3D fixed and the data is valid) 3. The GSM module starts sending the GPS data via GSM network back to the host side (The GSM LED blinking means the GSM network stand by and stay on means the GSM connected with some host) 4. Dial the Telephone number from the host side to the HI601VT main unit. 4 HI-601VT 5 5. Switch on HI-601VT decoder (Switch on the middle for data out via wired connection and to the most right side for wireless Bluetooth connection) 6. [. . . ] Voice message was transferred into standard digital NMEA protocol data 4. The NMEA data was transmitted back to the smart (PDA) phone via PDA cable 11 12 HOW to USE Option#3 USB port from LaptopPC 3 1 4 2 1. Decoder with smart (PDA) phone and laptopPC (or desktopPC): 1. The smart (PDA) phone calling or communicate with the HI-601VT 2. Voice message was transferred into standard digital NMEA protocol data 4. The NMEA data was transmitted to the laptopPC via USB cable 12 HI-601VT HOW to USE Option#4 13 Mobile Phone 3 1 4 2 1. Decoder with mobile phone and laptopPC (or desktopPC): 1. The mobile phone calling or communicate with the HI-601VT 2. Voice message was transferred into standard digital NMEA protocol data 4. The NMEA data was transmitted to the laptopPC via USB cable 13 14 HOW to USE Option#5 4 Bluetooth® dongle 3 1 2 1. Decoder with mobile phone and laptopPC (or desktopPC): 1. The mobile phone calling or communicate with the HI-601VT 2. Voice message was transferred into standard digital NMEA protocol data 4. The GPS NMEA data was transmitted to the laptopPC via Bluetooth® wirelessly 14 HI-601VT 15 4. With smartphone or mobile phone and track with SMS in none-real time bases (without decoder): The phone set up communication to HI-601VT. Press "71" and hang up the phone. In few seconds, the phone will receive a short message indicating the HI-601VT current coordinates. Then, go to Google Earth or any mapping software (in none navigation mode) and key in the coordinates. The map will point out the exact location. (1) Dial the number to HI-601VT (2) After connection, press "71". then, hang up. (1) (2) In few seconds, your mobile will receive a SMS message reqarding to the current location coordinate. 15 16 Key in the coordinates into the Google Earth or any mapping software for the location Key in latitude and longitude data received from SMS 16 HI-601VT 17 Use HI-601VT unit as a regular GPS receiver: By connecting different kinds of optional accessory cables from the side of HI-601VT mini1394 connector, the HI-601VT can also be all kind regular GPS receivers. For instance, HI-601VT can connect a HI-403BT cube and the combination can be a regular Bluetooth GPS receiver for car navigation. Or, connect an optional USB cable to become a USB GPS receiver for laptopPC navigation. Use HI-601VT as a regular Bluetooth GPS receiver (with HI-403BT box and cigarette lighter) 17 18 HI-601VT as a regular wired GPS mouse: By connection different optional connecting cables, HI-601VT can be all kinds of independent wired GPS receiver solutions. 18 HI-601VT 19 ACCESSORIES: Standard Accessories: 1. [. . . ] Connect the inclusive phone jack/PSII to mini1394 Y cable to the decoder: Mini1394 connector to the side of the decoder, phone jack to the phone jack outlet) B. As soon as turn on the power switch, the red LED light start blinking once per second. The updated coordinates will be sent out from "mini-1394 output" and "Bluetooth output" each second. The data format is 4800, 8, N, 1 and computer will take the RS232 data from COM 1, COM2 or other com port. [. . . ]