User manual HAIER 25F9K-T

[. . . ] When the TV set isn't going to be used for long time or it is in thunder and lightening, please pull out the plug from AC outlet and the antenna plug from the cover of the TV set. Explanation on the display tube In general, it is not needed to clean the tube surface. However, necessary, it's surface can be cleaned with a dry cotton cloth after cutting off the power. If using hard cloth, the tube surface will be damaged. Installation Antenna connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna . In different places, the suitable antenna type and position are different. 300 twin-lead cable Antenna adapter Mixer additional purchase Antenna input 75 standard coaxial type 75 coaxial cable Plug (additional purchase) AC power socket Note * It is recommended that you'd better use 75 coaxial cable to remove the disturbance caused by airwave. * Don't bind antenna cable and electric wire together. Preparation for the remote control Battery installation ! [. . . ] Press CH+/- button, move the indicator( ) to the option you want to adjust, then press VOL+/- button to do the adjustment. Then the parameter will be automatically stored in MEMORY option. OPTION CONTRAST BRIGHT COLOR SHARP VOL+ STRONG BRIGHT THICK SHARP VOLWEAK DARK LIGHT SOFT CONTRAST BRIGHT COLOR SHARP B. B 100 50 50 50 ON Adjusting µ Ä Í and ñ º Í · ½ ± ãthe Picture¼ Ï the Sound É ù Ò (coutinued) Multiple Sound Modes How to select the sound mode S. STD You can quickly select you most favored sound mode from the following three kinds of modes. Press the S. STD button to select the sound quality that you want. NORMAL VOL, HIGH VOL and LOW VOL can be selected in turn(their parameter may be adjusted due to your need). NORMAL VOL HIGH VOL LOW VOL Setting the sound This function can let you regulate the volume to the preconcerted parameter quickly( such as the NORMALVOL, HIGH VOL or LOW VOL). 1. Press MENU button, until FUNCTION 1 appears on the screen. CH+ FUNCTION 1 LANG. ENGLISH CURTAIN III LOW VOL 00 NORMAL VOL 00 HIGH VOL 00 VOL STORE OFF VOL- MENU VOL+ CH- 2. Press CH+/- button, move the indicator( ) to the HIGH VOL, then press VOL+/button to adjust the parameter you expect. With the same method, you can adjust the parameter of the NORMAL VOL or the LOW VOL. FUNCTION 1 LANG. ENGLISH CURTAIN III LOW VOL 00 NORMAL VOL 00 HIGH VOL 00 VOL STORE OFF Suppose the LOW VOL is A, NORMAL VOL is B, HIGH VOL is C, then that will be: 0 A B C 100 When adjusting the three modes, you should press them in proper order as HIGH VOL, NORMAL VOL, LOW VOL. 3. Press the S. STD button repeatedly to select the different sound setting modes. S. STD Volume store When the VOL STORE( as above chart) is set ON, the sudden change of the volume can be avoided when you change the channel( only the pre-50 channels volume). Adjusting the Picture and the Sound (coutinued) S. C. C, count and mute How to use the S. C. C(soft change channel) This TV set provides you with the function of S. C. When it is set "ON", the picture will fade in and fade out when the channel is changed. CH+ 1. Press MENU button, until FUNCTION 2 appears on the screen. VOL+ FUNCTION 2 SUBMARINE POS. EX. S. C. C COUNT VOL- MENU OFF 0:00 CH- 2. Press CH+/- button, move the indicator( ) to the S. C. C, then press VOL+/- button to set it ON or OFF. How to use the COUNT function This TV set provides you with the function of COUNT, if you want to know how long your TV set has been used, you can press MENU button, and find FUNCTION 2 , then you can know the time the TV has been on(count from 0 after 100, 000 hours). The time displayed is the total time when you watch the TV(time of standby status will not be included), the number cannot be altered through operating by the remote control or on the TV set. How to use the MUTE function When you want to pay attention to the environment or answer a telephone, or to meet guests, using the mute function is very convenient. 1. Press button, a sign will appear at the button left corner of the screen, and the sound of the TV set is cut off. 2. In order to recover the sound, press or press VOL+/-button. button again Setting the Timer This TV set provides you with three timer functions such as timer on, timer off and sleep off. Timer off Timer off Using this function can turn the TV set automatically into standby status at the preconcerted time. 1. Press MENU button, until TIMER appears on the screen. CH+ TIMER OFF 19:00 ON TIMER OFF 22:00 POS 0 CLOCK 1:40 APPOINTMENT OFF TIMER VOL- MENU VOL+ CH- 2. Press CH+/- button, move the indicator( ) to OFF TIMER, then press VOL+/button to set it ONCE , EVERY, or OFF. TIMER ONCE 19:00 ON TIMER OFF 22:00 POS 0 CLOCK 1:40 APPOINTMENT OFF TIMER CH+ 3. Press CH- button, move the indicator( ) to the next row. Then, press VOL+/button to set the time. VOL+ TIMER ONCE 19:30 ON TIMER OFF 22:00 POS 0 CLOCK 1:40 APPOINTMENT OFF TIMER VOL- MENU CH- 4. Press CH+/- button, move the indicator( ) to CLOCK, press VOL+/- button, and you can set the time(It will be the standard of the clock of TIMER ON/OFF). TIMER ONCE 19:30 ON TIMER OFF 22:00 POS 0 CLOCK 1:40 APPOINTMENT OFF TIMER Setting the Timer Sleep timer and timer on (coutinued) Sleep timer Using this function, the TV set can be changed into the standby status after a period of preset time from when this function is activated. 1. The utmost time for this function is 120 minutes, and the time interval is 10 minutes. There are totally 12 kinds of off-time. 2. Press the button repeatedly, the screen will show in turn as the right form. Timer on When this function is used, the TV set can automatically turn the power on at the preset time in the standby status and display the preset program. 1. Press MENU button, until TIMER appears on the screen. 2. Press CH+/- button, move the indicator( ) to the ON TIMER TIMER, then press VOL+/OFF TIMER EVERY button to set it ONCE , 19:00 EVERY or OFF. ON TIMER EVERY 3. Press CH- button, move the indicator( ) to the below. Then, press VOL+/- button to set the time. CH+ CH+ VOL- MENU VOL+ CH- 22:00 POS 0 CLOCK 1:40 APPOINTMENT VOL- MENU VOL+ 4. Press CH+/- button, move the indicator( ) to POS 0, press VOL+/button to set the channel with which the TV is turned on(take 5 for example). TIMER OFF TIMER EVERY 19:00 ON TIMER EVERY 22:00 POS 5 CLOCK 1:40 APPOINTMENT CH- 5. Press CH+/- button, move the indicator( ) to CLOCK, press VOL+/- button, and you can set the time(same as TIMER OFF and it will be the standard of the clock of TIMER ON/OFF). Setting the Timer (coutinued) The channels appointment function can help you conveniently preset as many as six programs at a time. At the preset time, the TV set will automatically change to the preconcerted channel. If two or more programs are set in a same time, the last channel number will be selected. Channels appointment Channels appointment 1. Press MENU button, until TIMER appears on the screen. TIMER OFF TIMER EVERY 19:00 ON TIMER EVERY 22:00 POS 0 CLOCK 1:40 APPOINTMENT CH+ VOL- MENU VOL+ CH- 2. Press CH+/- button, move the indicator( ) to CLOCK, press VOL+/- button, and you can set the time(same as TIMER OFF and it will be the standard of the clock of APPOINTMENT). 3. Press CH+/- button, move the indicator( ) to APPOINTMENT, then press VOL+ button to enter the sub-menu. 4. Press VOL+/- button to set the channel number you want (e. g. [. . . ] The batteries in the remote control may be exhausted. The batteries may be improperly installed. Check if there are obstacles between the remote control and the remote (infrared ray) receiver. Check if there is strong light interference around the remote (infrared) receiver. [. . . ]