User manual HAIER 29FV6T

[. . . ] If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment. Never place batteries in a fire. Avoid dropping the remote control and/or getting it wet. Function buttons and external sockets Front and side panel of the TV set S terminal TV/Video MENU Channel selector (input selector Volume up/ down Video1 input terminal Left sound track Power switch Power indicator Right sound track Infrared sensor window Rear panel of the TV set Antenna input EXT 1 The TV has 2 external sockets situated at the back of the set (EXT1 and EXT2). The EXT1 socket has audio and video inputs/ outputs. The EXT2 socket has audio and video inputs. EXT 2 *Connect either the S-terminal input terminal, VIDEO input terminal or the external socket, whichever is used. If you want to connect the TV set to the other audio/video equipment, please refer to P25. Buttons on the remote control Program scan Swap function Mute Program number Stand by Zoom function Call screen display Exit screen display/ Teletext TV/AV exchange Mono/stereo Sound mode selection Channel selection (Page up/down) Menu selection / adjustment (Subtitle) Tune menu (Index) Function menu (cyan) Teletext page hold Size E/W change Subcode/Time Digital selector Picture mode selection Volume selection Picture menu (Red) Sound menu (Green) Time menu (Yellow) Text display Reveal Teletext/TV mix mode Cancel mode Switching on/ off the TV set In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained. Switching on/ off the TV set Switching on/ off the TV set 1 Please press the power switch to switch on AC power supply and the power indicator will light. Power switch Power indicator 2 If the indicator is lighting in red, press the button on the remote control again. [. . . ] You can simply press the SCAN button to do this. The program numbers will appear one after another from beginning to end (each channel number will last about 2 seconds). 1 AUTO DK 62. 25MHz 2 BROWSE 3 BROWSE 1 AUTO DK 62. 25MHz 2 If you want to stop the function during auto scanning, simply press the SCAN button again. Searching channel This TV set has three methods to set the channels, which are respectively full automatic, semi- automatic and manual fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Full automatic mode TUNE 1 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. TUNE COLOUR SOUND BAND SKIP PROGRAM SEARCH FINE TUNE AUTO SEARCH AUTO DK VHFL OFF 0 2 Press the CH+/- buttons to select "AUTO SEARCH". TUNE COLOUR SOUND BAND SKIP PROGRAM SEARCH FINE TUNE AUTO SEARCH AUTO DK VHFL OFF 0 3 Press the VOL+ button to ensure automatic search function operates. All channels now playing program will be automatically preset in order . After the search has finished, the first program number will display on the screen. CALL Display function Press the CALL button, then the channel number and the systems will be displayed on the screen. 4 AUTO DK 144. 25MHz Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 buttons to choose desired channels I. E. channel 1 1 AUTO DK 83. 50MHz TUNE 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 Press the CH+/- buttons to select " SEARCH". TUNE COLOUR SOUND BAND SKIP PROGRAM SEARCH FINE TUNE AUTO SEARCH AUTO DK VHFL OFF 0 4 Press the VOL-/+ buttons to start searching. The VOL- down button is used for lower side program search. The VOL+ up button is used for higher side program search. Repeat this step, till find the desired channel. 6 SEARCH VHFL To turn off the on-screen menu EXIT In general, after you press the MENU button, the menu item display (PICTURE, SOUND, TIME, FUNCTION, TUNE, EXCHANGE, ETC. ) will automatically disappear within 15 seconds. If you want to eliminate these contents immediately, please press the EXIT button. Searching channel Continued Manual fine tune Manual fine tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. 1 Press the CH+/- buttons or PROGRAM NUMBER 0-9 button to choose desired channels I. E. 3 Press the CH+/- buttons to turn the YEAR/MONTH/DAY, press VOL-/+ buttons to set or adjust the YEAR/MONTH/DAY. FUNCTION ENGLISH BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR ON ON ON OFF ON Set up function Continued Fade and select a language Fade FUNCTION The FADE control allows time for the picture tube to warm up and gently turned on, which can help prolong the life of the picture tube. 1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen. FUNCTION ENGLISH BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR ON ON ON OFF ON 2 Press the CH +/- buttons to select "FADE . 3 Press the VOL-/+ button to turn the FADE function "ON" or "OFF" . FUNCTION ENGLISH BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR ON ON ON OFF ON Select a language 1 Press FUNCTION menu button, till FUNCTION menu shown on the right display on the screen. 2 Press the CH+/- buttons to select "AVL ". FUNCTION ENGLISH BACKGROUND NOISE REDUCE FADE CHILD LOCK AVL CALENDAR ON ON ON OFF ON 3 press the VOL-/+ buttons to select the desired language. Then all the items will be displayed in the selected language. Position exchange functions Exchange Exchange This feature enables TV programs that may be on a wrong TV channel number to be swapped/exchanged. This feature is very useful when Automatic Search Tuning has been used, to reallocate the found programs to the correct channel numbers. 1 Press the MENU button again (6 times), till the EXCHANGE menu display on the screen. 2 Press the VOL-/+ buttons or the PROGRAM NUMBER 0-9 buttons to set PROGRAM 1 TO 6. 3 Press the CH-/+ buttons to select " PROGRAM 2". 4 Press the VOL-/+ buttons or the PROGRAM NUMBER 0-9 buttons to set PROGRAM 2 TO 9. EXCHANGE PROGRAM 1 PROGRAM 2 EXCHANGE 6 2 EXCHANGE PROGRAM 1 PROGRAM 2 EXCHANGE 6 9 5 Press the CH+/- buttons to select "EXCHANGE". 6 Press the VOL-/+ buttons to set "EXCHANGE". EXCHANGE PROGRAM 1 PROGRAM 2 EXCHANGE OCT 6 9 Teletext Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc. ). Teletext Teletext functions You can press TELETEXT button into TELETEXT mode, press again to leave TELETEXT mode. All menu related functions are not available in TELETEXT mode. Only a few direct button control functions are available in TELETEXT mode, they are: Volume adjustment, but without OSD display. [. . . ] The electric levels of video and audio output signals are fixed. To outside input Antenna input To video/audio input DVD, VCD and other reproducing equipment Troubleshooting guide To assist in location possible faults use help guide below. BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Picture with snow Noise This is called ghosting which can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect. Electrical interference which can be caused by cars, motorbikes etc, Fluorescent lamps and dirty insulators on overhead power cables. Press S. STD button to choose USER mode, then check wether the BALANCE item value in SOUND menu equal to 0. [. . . ]