User manual HAIER 29T9B

[. . . ] When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. To prevent the TV set from firing and electric shock, don't expose the TV set to rain or moisture. 2. In order to prolong the using life of the TV set, please place it on a ventilated place. 5. [. . . ] The TV set will search automatically all available programs, after that, all available programs will be stored in turn and the TV set will return to the first channel. ASM STOP VHFL 0 CH+ If you want to stop the search, just press VOL- button. The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the order of the program will be changed. VOL+ VOL- MENU CH- After searching Press CH+/- button to check the channels. If the color or sound is abnormal in a certain channel, it may be the color or sound system has not been set properly, so you should adjust it to the proper system (Reference to page 7). Tuning(coutinued) Manual search Manual search CH+ 1. Press CH+/- button or the Direct-digit Choosing button to select a channel directly(take channel 1 for example). Press MENU button, until TUNING appears on the screen. VOL- MENU VOL+ TUNING POSITION 1 BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY CH- 3. Press CH- button and move the indicator( ) to SEARCH. TUNING POSITION 1 BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY Direct-digit Choosing Button CH+ VOL- MENU VOL+ 4. VOL- button is used to search the lower frquency channel. VOL+ button is used to search the higher frequency channel. Repeat the steps until you find the channel you need. TUNING POSITION 1 BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY CH- 5. When you plan to store another new channel at a new place, use CH+/- button and move the indicator( ) to POSITON, then press VOL+/button to select a channel number and press CH+/- button to move to SEARCH, then repeat the fourth step. TUNING POSITION 1 BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY Tuning(coutinued) MFT MFT(manual fine tune) CH+ When you can't get a satisfactory picture and audio effect, you can fine tune to obtain. VOL+ VOL- MENU CH- 1. Press CH+/- button or the Direct-digit Choosing button to select a channel directly (take channel 1 for example). 2. Press MENU button, until TUNING appears on the screen. TUNING POSITION 1 BAND UHF SKIP OFF SEARCH UP MFT DOWN AUTO MEMORY Direct-digit Choosing Button 3. 2. Press CH+/- button, move the indicator( ) to the ON TIMER TIMER, then press VOL+/OFF TIMER EVERY button to set it ONCE , 19:00 EVERY or OFF. ON TIMER EVERY 3. Press CH- button, move the indicator( ) to the below. Then, press VOL+/- button to set the time. CH+ CH+ VOL- MENU VOL+ CH- 22:00 POS 0 CLOCK 1:40 APPOINTMENT VOL- MENU VOL+ 4. Press CH+/- button, move the indicator( ) to POS 0, press VOL+/button to set the channel with which the TV is turned on(take 5 for example). TIMER OFF TIMER EVERY 19:00 ON TIMER EVERY 22:00 POS 5 CLOCK 1:40 APPOINTMENT CH- 5. Press CH+/- button, move the indicator( ) to CLOCK, press VOL+/- button, and you can set the time(same as TIMER OFF and it will be the standard of the clock of TIMER ON/OFF). Setting the Timer (coutinued) The channels appointment function can help you conveniently preset as many as six programs at a time. At the preset time, the TV set will automatically change to the preconcerted channel. If two or more programs are set in a same time, the last channel number will be selected. Channels appointment Channels appointment 1. Press MENU button, until TIMER appears on the screen. TIMER OFF TIMER EVERY 19:00 ON TIMER EVERY 22:00 POS 0 CLOCK 1:40 APPOINTMENT CH+ VOL- MENU VOL+ CH- 2. Press CH+/- button, move the indicator( ) to CLOCK, press VOL+/- button, and you can set the time(same as TIMER OFF and it will be the standard of the clock of APPOINTMENT). 3. Press CH+/- button, move the indicator( ) to APPOINTMENT, then press VOL+ button to enter the sub-menu. 4. Press VOL+/- button to set the channel number you want (e. g. 5. Press CH- button to enter the TIME item. Press VOL+/button to set the time. Repeatedly press VOL+/- button, the time changes with a rate of one minute; Press the button without releasing, the time changes with a rate of ten minutes. APPOITMENT POS TIME 100 OFF 000 OFF 000 OFF 000 OFF 000 OFF 000 OFF CH+ VOL- MENU VOL+ APPOITMENT POS TIME 100 OFF 000 OFF 000 OFF 000 OFF 000 OFF 000 OFF CH- DISP 6. Press the CH- button, and follow the instructions of step 4 and 5, you can do the setting of the next channel. 7. Press DISP button to exit the TIMER menu. APPOITMENT POS TIME 100 12:58 000 OFF 000 OFF 000 OFF 000 OFF 000 OFF At the preset time, the TV set will automatically change to the preconcerted channel; This function is available only when the TV set is on, and it cannot be used in the status of standby or power off. Setting the other Function Language and screen protection How to select the language on the screen ÆÁÄ»ÓïÑÔ¼°ÆÁÄ»± 1. Press MENU button, until FUNCTION 1 appears on the screen. CH+ VOL- MENU VOL+ LANG. ENGLISH CURTAIN III LOW VOL 00 NORMAL VOL 00 HIGH VOL 00 VOL STORE OFF CH- 2. Press CH+/- button, move the indicator( ) to LANG. , then press VOL+button to select the language and the menu on the screen will be displayed with the language you select. How to activate the function of screen protection If no signal has been received by the TV set, when the B. B function is set ON, the screen will change into the form on the right shows( game background ) . VOL+ CH+ VOL- MENU CH- Press MENU button, until PICTURE appears on the screen. Then press CHbutton to move the indicator ( ) to B. B, and press VOL+/- button to set it ON. PICTURE CONTRAST BRIGHT COLOR SHARP B. B 100 50 50 50 ON Setting the other Function(continued) Curtain function and calendar display How to use the Curtain function This TV set provides three types of Curtain function for you to select. CH+ 1. Press the MENU button, until the FUNCTION 1 appears on the screen. VOL+ VOL- MENU CH- 2. Press CH+/-, and move the indicator( ) to CURTAIN, then press VOL+ to select from I, II and III. [. . . ] SEARCH LOCK OFF POS LOCK ON AV LOCK OFF TIMER LOCK ON CHILD LOCK OFF ALL CLEAR OFF Direct-digit Choosing Button 3. Press CH+/- button, move the indicator( ) to SEARCH LOCK, then press VOL+ button to set it ON or OFF. CH+ Note: VOLMENU VOL+ CH- 1. When the CHANNEL or AV LOCK is set ON, the channel or av cannot be used, hence the screen will change into black and indicate that it has been locked. The TV set will be in the state of mute. 2. When the CHILD LOCK is set ON, if the buttons on the TV are pressed, it will indicate that the TV set is in the status of CHILD LOCK, and the buttons won't work. 3. When the SEARCH LOCK or the TIMER LOCK is set ON, if you want to enter the TUNING or TIMER menu, you will have to type the password. Game This TV set provides you with the SUBMARINE game, after entering the game, except the buttons that are appointed in the game( for example, the game button, VOL+/-and CH+/-, etc. )and the DC Standy button, the other buttons cannot be used. Game control buttons and method of playing the game Game control buttons Fire button CH+ FIRE To shoot also use the MENU button VOL+ VOL- MENU Used to turn up or down MODE CH- RESTART To select the background when playing game To restart the game Used to turn left or right EXIT To exit game Method of playing the game 1. Press MENU button until FUNCTION2 appears on the screen. Press the CH+/- buttons to select the SUBMARINE item. [. . . ]