User manual HAIER 34T9B-T

[. . . ] Press the button to hide the teletext information. Either press the button or the Text button to exit the cancel display mode. [. . . ] Either press the button or the Text button to exit the cancel display mode. Language change Pressing the button will change the Teletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number. Size Pressing the button changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read. Disturb Noise Double or Triple Image Normal Volume Sound mute Normal No sound Ensure that the power supply is connected to the TV set and turned on. Also ensure that the TV set is not in "Listen Mode" or that the brightness and contrast are not turned down. No Picture No sound Adjust colour control No colour Normal volume Adjust channel again Scramble Normal or Weak Volume Colour Spot Normal volume Colour Purity fault which can be caused by moving the TV set, placing magnets near the TV screen or turning on/off house hold appliances such as vacuum cleaners near the TV set. Turn the TV off with the mains power switch for 15 minutes. When the power is turn on again the TV set will automatically degauss the picture. In server cases leave the TV set turned off over night. Note: 1. If the fault can not be repaired using the above guide consult with your local authorized service center. 2. The TV set must only be repaired by a qualified registered service person. [. . . ] In server cases leave the TV set turned off over night. Note: 1. If the fault can not be repaired using the above guide consult with your local authorized service center. 2. The TV set must only be repaired by a qualified registered service person. [. . . ]