User manual HAIER 46EP14S

[. . . ] Operation is subject to the following two conditions: (1) This device may be not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION: To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used when connecting this plasma display to video equipment; and maintain at least 40cm spacing to other peripheral device. CANADIAN NOTICE: This Class B digital apparatus compiles with Canadian ICES-003. 1 IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. [. . . ] 11)Lighting precaution ---for added protection for this product during a lighting storm or when it is left unattended for long period of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lighting and power line surges. 12)Never push objects of any kind into this product through openings as they may touch dangerous voltage point or short out parts that could result in a fire or electric shock. Avoid spilling liquid of any kind on the product. 13)Servicing ---do not attempt to service the product by yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to authorized service personnel. 14)Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. 2 b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. (You can switch among six screen sizes. ) 23 24 25 Direct access to closed caption. Sleep times button. 15 + - + Insert 2 AA alkaline batteries as shown. range 33 feet CC RATING SLEEP 16 at the display sensor. range 33 feet sensor. 17 Operating the Plasma as a PC monitor Connect D-SUB(15PIN) to analog RGB output interface (Input option RGB). Conncet DVI to digital RGB output interface (Input option RGB). Note: 1. The DVI connector of the Display is DVI-I, which does not support analog signal input. The RS-232 connector provides a transmission interface for professional technicians to update firmware, without providing additional communication functions. 18 The component terminal: (Y/PbCb/PrCr) connects to the video component output devices(such as DVD or HDTV TUNER). The audio connects to the audio output of the DVD or HDTV TUNER. The S-Video terminal: connects to the Y/C S-Video output of a video output devices(such as S-VHS or DVD). The audio should input via Audio 2 (INPUT Option S-Video). CVBS In terminal connects to the CVBS(Video) output of a device(such as VHS, S-VHS or DVD). The audio should input via Audio 2(INPUT Option Av1). 19 TV module Connect to antenna Input and output connection A/V OUT TV module VHF/UHF: Connect antenna or CATV 75 coaxial cable to receive TV/CATV signal. [. . . ] Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected. If the cabinet becomes dirty, wipe it with a soft, dry cloth. *If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe tit dry with a dry cloth. [. . . ]