User manual HAIER 50HP25BAT

[. . . ] PLASMA TV OWNER ' S MANUAL MODEL S :42EP25BAT 42EP25SAT 42HP25BAT 42HP25SAT 50HP25BAT Please READ this manual carefully before operating your TV, and retain it for future reference. WARNING RISK ELECTRIC SHOOK DO NOT OPEN WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product. Read the following safety instruction before starting the operation. [. . . ] ) : Move cursor, /OK: Go to submenu, EXIT: Exit main menu / ME NU: Return to upper menu, 5 When you are satisfied with your choice, press MENU button to return to the previous menu or Press EXIT button to return to TV viewing. 24 PLASMA TV Operation Select the desired program 1 Using the CH+/- buttons. Press the CH+ button to select a channel number in number increasing direction. Press the CH- button to select a channel number in number decreasing direction. (Note: If Skip is ON on one channel, press CH+/- button, the channel will not appear. ) Select the desired sound Press the VOL-/+ or / buttons on the remote or the front of the TV set to adjust the volume level. When the volume buttons are pressed the volume level is displayed automatically on the TV screen. Volume - + 21 Mute When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. 1 Press the MUTE button on the remote control and " " type face will display on the screen. At this time, the sound of the TV set is turned off. 2 If you want to recover the sound, press the MUTE button again or directly press VOL+ buttons. Owner s Manual 25 Operation Video menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. How to select picture modes The picture mode provides the pre-defined images settings. There are four settings: standard/ vivid /mild/custom. Press P. MODE button on the remote controller the Video Mode list is out , press P. MODE to select the option (Standard/Vivid/Mild/Custom) Standard: normal mode. Vivid: mode of watching the movement of picture. Mild: the effect of the picture is soft. Custom: picture effect which you favorite. How to customize your own picture status 1 2 3 Press the MENU button and then use Press the Press the button and then use button and then use / / / button to select the Video menu. Video Audio Time A B C button to select the desired items. button to adjust the setting. Mode Contrast Brightness Tint Color Sharpness DNR Custom 50 50 0 50 50 Off Standard Vivid Mild Custom 4 When you are satisfied with your choice, press MENU button to return to the previous menu or press the EXIT button to return to TV viewing. Channel Function Color Temperature Standard Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged. Lock : Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menu Brightness This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture. Tint Allows you to select the color mix (Tint) of the picture. Note: Only when the item of mode is custom , the Contrast Brightness Tint color Sharpness can be set by user . In other mode the value of them are preset by program . Color This will adjust the saturation level of the colors to suit your personal preference. Sharpness This will adjust the sharpness of fine details in the picture. DNR (Digital Noise Reduction ) Automatically filters out and reduces the image noise and improves picture quality when receiving weak video signals. Select Off/Weak/Medium /Strong according to the image noise. Color temperature This will increase or decrease Warm (red) and Cold (blue) colors to suit personal preferences. Select Cold to give the white colors a blue tint, Standard to give the white colors a neutral tint, Warm to give the white colors a red tint. 26 PLASMA TV Operation Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. - Note: If a fixed image is displayed on the screen for a long time, it image may become imprinted on the screen and remain visible. 1 2 3 Press the ARC button the Aspect Ratio menu appearance on the screen. Press the / button to select the desired picture format. Press the OK button to confirm. 4:3 mode Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. 16:9 mode Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. Subtitle Choose Subtitle when you want to adjust the picture in a non-linear proportion, that is, more enlarged at top sides and no alteration , at bottom side. PANORAMA Choose PANORAMA when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture size, the image may become distorted. Notes In TV, VIDEO1, VIDEO2, SVIDEO modes, all screen modes can be selected. [. . . ] Verify if the antenna is correctly connected. Verify if the antenna is in good condition. Check for local interference such as an electrical appliance or power tool. Disconnect the television from power supply and, 10 seconds later, connect the television to the power supply. [. . . ]