User manual HAIER AEB-40100ET

[. . . ] Microwave Oven Instruction for use HMW40AEB HMW40AEBS AEB-40100ET AEB-40100ET(S) Specific Number: 0050502453 Electricity schematic diagram Warning! 1. No one except the professional technicians can decompose the microwave oven. Do not put metal stick into the interlock hole at the front of the cavity. Do not add excessive force to opposite direction on the door. [. . . ] Before installing your new appliance, you need to check as for visible external damage. Under no circumstances should the appliance be started, if it is damaged. Therefore, thoroughly check the appliance as for: Damaged packaging, indicating that the appliance may have been damaged during shipment Damaged cabinet Damaged door glass panel Visible damage to the cable / plug If you suspect any damage, please have the appliance tested by the customer support service. At all costs prevent the emission of any hazardous microwave radiation by not starting up a damaged oven. 10 Calling the customer support service To ensure prompt help when needed, please have ready the following data before calling the customer support service: Appliance Type / Model (see rating plate) Date of purchase Name and location of your dealer Description of the malfunction The address and phone number of the customer support service centre responsible for your appliance can be found in the attached customer support service directory , or in the guarantee card. 11 Guarantee Please note the general guarantee terms and the guarantee period stated in the attached guarantee card. If the appliance documentation does not include a guarantee card, please contact your dealer . The manufacturer works constantly at the further development of all products. Please therefore bear this in mind as the form, set up and technology are subject to change, without prior notice. 3 Installing the oven: (FIG. A) a) Unpack the appliance b) Remove all objects from the inside of the oven. c) Carefully remove all plastic films and stickers from: - the cabinet - the door - the turntable axle - drive shaft Failure to carefully remove plastic films and stickers may lead to a fire hazard. d) Clean the oven interior with a damp cloth. Do not use sharp cleansers or scouring agents!e) Unpack the turntable (not all models are equipped with) and its undercarriage 10 3 English Instruction for use English 8 Cleaning and care Caution ! Instruction for use f) Place the undercarriage in the circular track on the oven interior floor g) Lay the turntable onto the undercarriage. By gently turning it, the guide fits into the drive shaft. Place the appliance on an even and non-skid surface. It must be stable enough to easily support the appliance even if the oven contains goods. Pull out the power plug, or activate fuse safety switch. If you cannot reach the plug, keep the oven door open (also when cleaning the outside). Only in this way you can prevent the appliance from being switched on when the function keys or switches are inadvertently activated. Under no circumstances should water or a cleaning fluid get into the inside of the oven. This is particularly important when cleaning around the air vents or rear wall. Otherwise serious accidents may ensue due to electric shock and the appliance may be damaged. [. . . ] 1. Enter the power level by touching Power level 8 times. The display shows 30 and Enter/Cook/Time/ indicator will flash. 3. Now touch Start keypad, the oven start working and the time you setup will count down. When the cooking is finished, The display shows , the buzzer of control panel will remind you with three short alarms. [. . . ]