User manual HAIER CW493WH

[. . . ] Integrated Dishwasher CW493 BL/WH/SS Users Operating Instructions Before operating this appliance, please read these instructions carefully Guarantee CDA appliance carry a five-year parts and one-year labour guarantee. CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be free of both labour and parts charges. After the first year and within five years, the parts will be supplied free of charge provided that the repair is carried out by an agent authorised by CDA and the labour will be charged at the commercial rate applicable at the time of repair. [. . . ] 3 4 Load for 12 Standard Settings 1 2 fig. A fig. B How to use the upper rack The upper rack is designed to hold more delicate and lighter dishware, such as glasses, cups and saucers, plates, small bowls and shallow pans (as long as they are not too dirty). - Position the dishes and cookware so that they do not get moved by the spray of water. The upper rack can be adjusted for height by using the knobs located on the sides of the rack itself (see fig. B). fig. C Shelf Lean tall glasses and those with long stems against the shelf-not against other items to be washed (see fig. C). Long items, serving cutlery, salad, servers or knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms. The shelf can be folded back when not required for use. . 5. Turning on the Appliance GB Starting a wash cycle - Make sure that the plug for the appliance is inserted into the wall socket. - Make sure that the water supply is turned on to full pressure. - Load the dishwasher (see the section entitled, "Loading the Dishwasher" on page 5). - Pour in the detergent (see the section entitled, "Salt, Detergent and Rinse Aid" on page 3 and 4). - Turn the knob located on the right of the control panel in clockwise direction until the number or symbol for the cycle setting is aligned with the reference mark (see the section entitled, "Wash Cycle Table" on page 8). Cancelling or modifying a wash cycle setting - Press the ON-OFF button, and the ON-OFF light will turn on. At A cycle that is underway can only be modified if it has been this point, the wash cycle will begin. Otherwise, the detergent may have alIf you forget to load some of the dishes ready been used, and the appliance may have already drained The wash cycle can be interrupted by pressing the ON-OFF button. If this is the case, the detergent dispenser must You can then load additional dishes and turn the appliance back on. be refilled (see the paragraph entitled, "Loading the Detergent" on page 4). Press the ON-OFF button, and the ON light will turn off. Rotate the knob in clockwise direction to the desired cycle setting (see the section entitled: Starting a wash cycle ?F. If absolutely necessary, it can be positioned on its back. Remove the Plug Before cleaning or performing maintenance, always remove the plug from the socket. Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a sponge will prevent this from occurring. No Solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwasher. When You Go on Holiday When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance. . 7. Wash Cycle Table Cycle Eco Button Rapid Button Cycle Selection Information Description of Cycle Pre-wash with hot water. Very dirty dishes, pots and Rinse with cold water. Very dirty dishes, pots and Pre-wash with hot water. [. . . ] In addition, the base must be trimmed if it interferes with the opening of the door. Mounting the Wood Door Panel onto the Dishwasher Place the wood panel onto the door of the dishwasher. Then perform the installation steps described below, based on whether the panel is for a totally built-in model or integrated with the control panel. Panel Integrated with the Control Panel Insert the metal fins into the slots located on the dishwasher door, hooking the panel into place by sliding it to the right (see Fig. 5). Using the Drilling Template (Fig. 3 - integrated with control panel ) Align the top edge of the template (identified with the "A" arrow ) with the top edge of the panel. On both sides of the template (top and bottom ) are written the various dimensions that correspond to the different possible widths for the panel. Align the template with the side of the panel (left or right), making sure that the panel coincides with the appropriate dimensions. [. . . ]